westy td rev counter question
Moderators: User administrators, Moderators
- flateric
- Registered user
- Posts: 62
- Joined: 10 Sep 2007, 15:39
- 80-90 Mem No: 4311
- Location: fylde coast north west
westy td rev counter question
hi, guys. just noticed on my way home tonight the rev counter has stopped working,any ideas what to look for,what happen if i leave it till it gets warmer in short what does it do and do i need it,. your comments please. regards rick
- Syncro G
- Registered user
- Posts: 239
- Joined: 21 Mar 2007, 19:15
- 80-90 Mem No: 3988
- Location: Peak District
Re: westy td rev counter question
Probubly a bad conection on the back of the clock itself or the dash multiplug (any other dash lights doing funny things or not self testing before you start?). If the battery light comes on when key turned on and goes out after the engine is started (and maybe pedal blipped) I wouldn't worry much. Shorting wires are the only sereous cause, which you will need to fix quick; if its just unplugged/loose conection it won't damage anything, fix it when fed up with it not working. Its driven off the altinator so that needs to work properly.
If you pull the conector off the high oil presure switch, make sure it doesn't touch any metal and rev the engine to over 2krpm the buzzer of doom should go off, if it does the problem will be the 3 pin plug on the back of the rev counter as the dash is obveously getting the engine speed signal to trigger this (gentle poke/hit dash might make it work breefly - carefully tighten conectors for more perminant fix), if it doesn't it'll be the altinator or wires between it and dash plug, unless the buzzer of doom thing is also bust.
If you pull the conector off the high oil presure switch, make sure it doesn't touch any metal and rev the engine to over 2krpm the buzzer of doom should go off, if it does the problem will be the 3 pin plug on the back of the rev counter as the dash is obveously getting the engine speed signal to trigger this (gentle poke/hit dash might make it work breefly - carefully tighten conectors for more perminant fix), if it doesn't it'll be the altinator or wires between it and dash plug, unless the buzzer of doom thing is also bust.
Glen Syncronaut: 113 - 1992 JX Syncro pannel van
- flateric
- Registered user
- Posts: 62
- Joined: 10 Sep 2007, 15:39
- 80-90 Mem No: 4311
- Location: fylde coast north west
Re: westy td rev counter question
thanks for that glen. will check it out at the weekend, cheers rick.
- flateric
- Registered user
- Posts: 62
- Joined: 10 Sep 2007, 15:39
- 80-90 Mem No: 4311
- Location: fylde coast north west
Re: westy td rev counter question
hi guys, just had a mate down, stripped the dash out & checked all connections on & off. but still not working, also checked engine compartment, but no loose wires. any further tests that a dummy could do ??? was hopeing to go to north wales in a couple of weeks will it be safe to use,if not is it a job for auto electrician or a mechanic any suggestions please ??? regards rick.
- VWCamperfan
- Registered user
- Posts: 993
- Joined: 08 Jul 2007, 19:47
- 80-90 Mem No: 4000
- Location: Sheerness, Kent.
Re: westy td rev counter question
https://club8090.co.uk/forum/viewtopic.php?f=2&t=46075" onclick="window.open(this.href);return false;
Mark.
I'm Not A Complete Idiot... Some Bits Are Missing!
1.6 Modified CT engine.
I'm Not A Complete Idiot... Some Bits Are Missing!
1.6 Modified CT engine.