New engine? / Red oil pressure light coming on. Help!!!!

Big lumps of metals and spanners.

Moderators: User administrators, Moderators

Locked
Stimpy
Registered user
Posts: 20
Joined: 15 Feb 2006, 22:49
80-90 Mem No: 0
Location: Winchester

New engine? / Red oil pressure light coming on. Help!!!!

Post by Stimpy »

Hello - A few weeks ago, en route from Devon back to Hampshire, the red oil light came on. We pulled over within a minute or so, and switched off. The AA towed the van home, and said that the problem would be either - the oil pump not working, a faulty oil pressure sensor, or some third option I can't recall. There was plenty of oil in the engine when it happened.

I rang our regular mechanic who said that the oil pumps never go on T25s, and that it would be something a lot more serious (and expensive - grrrr....). He wants to do oil pressure tests, but I suspect that he was angling to install a new engine - megabucks!

So, can anyone tell me more about the red light coming on, what it might mean, how I can find out if the engine is knackered, and so on?

Also, if it *is* the worst case, and the engine really is knackered, can anyone tell me the best option for repair / replacement? Do I cough up £1,000 or whatever for one of those Vega (?) engines? Who do you recommend to install them on the South coast? Is the Bournemouth mechanic listed on the 80-90 site any good?

So many questions, I know, but I hope members here can advise.

Thanks in advance,

Cheers,

Stimpy

Ivorblueun
Registered user
Posts: 84
Joined: 10 Oct 2005, 19:37
80-90 Mem No: 1407
Location: Torpoint, Cornwall

Post by Ivorblueun »

Have you started the engine since and does the oil light stay on or go off/flash?and for the cost of the sensors against hourly rate in garage I would replace them first and see if it cures the problem.
Stu

mine was a blue 89 Td Hitop

User avatar
trickydicky
Registered user
Posts: 135
Joined: 15 Apr 2006, 14:57
80-90 Mem No: 2566
Location: Cheltenham Membership No.2566

Post by trickydicky »

What engine, if it is the D.G. I responded to someone on technical on how to change the sensors and what socket you need. Just hunt back through, it was a thread about a warning buzzer.
It's nothing a great deal of time and money can't fix
86' 1.9 D.G. Autosleeper poptop in white.

Locked