High top lining

Post by **colynmac** » 13 May 2006, 19:46

Whats the best adhesive to use to stick the lining onto the inside of the GRP high top on my leisuredrive

Colynmac

Post by **Ivorblueun** » 13 May 2006, 19:56

I've used contact spray adhesive its a lot easier and less messy to use than out of a tin. have a look here http://cgi.ebay.co.uk/SPRAY-ADHESIVE-BO ... dZViewItem

Post by **Ray** » 13 May 2006, 22:09

You need high temperature contact adhesive otherwise during hot weather the lining will come unstuck.

Post by **colynmac** » 14 May 2006, 09:27

Thanks guys

The high temp issue now explains why my new lining has dropped.

colynmac

Post by **futurecut** » 14 May 2006, 16:39

I used both carpet fitters and spray evostick. Where it went on to metal all is well but onto wood on the roof and it's bubbling. I doubt this is a heat issue as it would droop on the metal too. Looks like the carpet has actually stretched?

Maybe i should have sealed the wood with pva first? Any ideas for a lasting fix?

Thanks