Water hoses - where to get them from !!
Moderators: User administrators, Moderators
- ghost123uk
- Registered user
- Posts: 6855
- Joined: 10 Mar 2006, 10:15
- 80-90 Mem No: 2585
- Location: John in Malpas, in the very S. W. part of Cheshire.
- Contact:
Water hoses - where to get them from !!
OK I am half way through my engine swap ( in no hurry )
I need to replace this hose ( 1" bore x 6" long )
[IMG:400:232]http://img.photobucket.com/albums/v616/ ... /Hose1.jpg[/img]
that goes here ( by the way my flash makes that bay look a lot worse than it is, honest )
[IMG:400:234]http://img.photobucket.com/albums/v616/ ... ation1.jpg[/img]
Trouble is JK and GSF don't list it.
Seems no one stocks rad hoses any more ( likely because modern ones don't perish )
I could go to a breakers and find summat that would fit, but that's a load of mither in terms of time, driving and fannying about compared to just getting one over the counter or in the post !!
Any thoughts folks ?
I need to replace this hose ( 1" bore x 6" long )
[IMG:400:232]http://img.photobucket.com/albums/v616/ ... /Hose1.jpg[/img]
that goes here ( by the way my flash makes that bay look a lot worse than it is, honest )
[IMG:400:234]http://img.photobucket.com/albums/v616/ ... ation1.jpg[/img]
Trouble is JK and GSF don't list it.
Seems no one stocks rad hoses any more ( likely because modern ones don't perish )
I could go to a breakers and find summat that would fit, but that's a load of mither in terms of time, driving and fannying about compared to just getting one over the counter or in the post !!
Any thoughts folks ?
Got a new van, but it's a 165bhp T4 [shock horror] Accurate LPG Station map here
-
- Registered user
- Posts: 570
- Joined: 29 Jan 2007, 00:50
- 80-90 Mem No: 3784
- Location: Blackdown Hills of Devon and Somerset
- Contact:
- Hacksawbob
- Registered user
- Posts: 4444
- Joined: 11 Oct 2005, 07:11
- 80-90 Mem No: 1168
- Location: Lancs UK member 1168
Thanks for that bit of information when I wanted that exact piece of rubber hosing for one of my customers I was told it was no longer available for love or money from my local VAG. It cost me a fortune in trying to find a rubber hose that would contort to that figuration in the end we found another hose and cut it to fit. 

- Ian Hulley
- Registered user
- Posts: 12661
- Joined: 11 Oct 2005, 08:08
- 80-90 Mem No: 1323
- Location: Wirksworth, Derbyshire ... or at t'mill
- Blue Meanies
- Registered user
- Posts: 43
- Joined: 04 Sep 2008, 21:13
- 80-90 Mem No: 3990
- Location: Grantham
Hoses 4 all
You could try TPS Nottingham
0115 852 80 80
Pricey but good.
0115 852 80 80
Pricey but good.
DENK AN DIE UMWELT - FAHR MIT DEM BUS!
- ghost123uk
- Registered user
- Posts: 6855
- Joined: 10 Mar 2006, 10:15
- 80-90 Mem No: 2585
- Location: John in Malpas, in the very S. W. part of Cheshire.
- Contact:
syncrosimon wrote:Have you tried VW for a new one?
and
Hacksawbob wrote:251 121 130 B £8.50 ex vat from your friendly local commercial VW van centre be sure and get a pair of N 016 404 1 spring clips whilst your at it £2.61 each if you want to do it right.
Thanks for reminding me that it is not always a waste of time checking with the dealers guys !!
The Volkswagen Van Centre in Wrexham (0844 8112400) are getting me one in a couple of days

Got a new van, but it's a 165bhp T4 [shock horror] Accurate LPG Station map here
- ghost123uk
- Registered user
- Posts: 6855
- Joined: 10 Mar 2006, 10:15
- 80-90 Mem No: 2585
- Location: John in Malpas, in the very S. W. part of Cheshire.
- Contact:
Just an update for future readers of this.
That part number did not fit properly at all
I bought it (£8.50) and got it home only to find it was too much of a Z shape whereas mine was more of a gentle S shape ( see pics above ) and shorter in both length and width.
I had to cut 3" off it and force the Z bend into a gentle S curve, producing a slight kink in the pipe in the process.
At least it does the job, but it's not "right".
Still grateful for the help though folks.
That part number did not fit properly at all

I bought it (£8.50) and got it home only to find it was too much of a Z shape whereas mine was more of a gentle S shape ( see pics above ) and shorter in both length and width.
I had to cut 3" off it and force the Z bend into a gentle S curve, producing a slight kink in the pipe in the process.
At least it does the job, but it's not "right".
Still grateful for the help though folks.
Got a new van, but it's a 165bhp T4 [shock horror] Accurate LPG Station map here