cv joints
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 250
- Joined: 08 Oct 2005, 11:49
- 80-90 Mem No: 94
- Location: St Albans, Herts: Syncronaut No 27
cv joints
just had my rear cv joints replaced, were knocking when hot after a long run. the vibration that I was experiencing has gone and I was thinking it was prop shaft related, just a mild prop ringing now. Obviously the vibrations can come from anywhere in the drive chain. Perhaps a new prop bush would fix the ringing now?
Ray
2.1dj RHD syncro
2.1dj RHD syncro
- Aidan
- Trader
- Posts: 7133
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
- Contact:
backlash in the gearbox and front diff and prop all combine to give knock that gives ring........and if the front output bearing is worn....or the spigot bearing in the front diff input shaft.......still can't get the bushes from SA so only alternative is a prop refurber who can obtain and fit the bronze bush
VW designed in the prop ringing, so even with a perfect unworn bush 2WD's can hear Syncros coming around the mountain.....
What 2WD's are doing up the mountain in the first place I never have discovered, but that's my theory and I'm sticking to it
What 2WD's are doing up the mountain in the first place I never have discovered, but that's my theory and I'm sticking to it

The 80-90 Tech Wikipedia Your 1st port of call

Syncro Kastenwagen / 16" Kombi Camper
Syncronaut No. 1