Petrol Tank breather hose seals

Post by **richnewton** » 02 Jun 2008, 19:09

does anyone have a part number for these.......mine are all perished, its the seal that the breather tubes push into in the expansion tanks?

cheers rich

Post by **bigherb** » 02 Jun 2008, 20:10

If it's the one's on the top of the expansion tanks N901 005 01

Post by **richnewton** » 03 Jun 2008, 09:33

no its the ones on the bottoms where the breather hose pushed into the plastic expansion tank? i have had a look on vagcat and mine seems to be a bit different. Are the tanks supposed to have a built in nipple

which the pipe slips over?

Post by **irishkeet** » 03 Jun 2008, 11:53

yep
there is a little nipple for the pipe to slip over, can be a bugger to get on
chew the pipe or put in warm water first
irishkeet

Post by **richnewton** » 03 Jun 2008, 12:09

looks like my nipples have already been broken off and replaced with grommets.............bugger. looks like new expansion tanks then.

Post by **richnewton** » 03 Jun 2008, 19:02

ok it seems the Aircooled had a different expansion tank which used grommets instead of nipples. this is what i need..............
[img][IMG:799:602]http://i11.photobucket.com/albums/a184/ ... IM1516.jpg[/img][/img]