speedo

Post by **airdale1000** » 20 Mar 2008, 23:48

hi
have just bought a 88 trident, the speedo works but the milage is not moving. any ideas?

Post by **Mocki** » 20 Mar 2008, 23:58

a spot of superglue on the end of the blue cog on the end where it joins the shaft, should solve it........ be gentle taking it to bits tho.....although you have not a lot to loose, its no good as it is!

Post by **Red Westie** » 21 Mar 2008, 16:20

I've repaired several like this, basically the gear starts moving on the shaft and drops out of mesh.
OooPer glue repairs them for a bit but everyone I've done has failed again within a matter of months.
Replacent head I'm afraid.
Martin

Post by **airdale1000** » 21 Mar 2008, 17:40

Red Westie wrote:I've repaired several like this, basically the gear starts moving on the shaft and drops out of mesh.
OooPer glue repairs them for a bit but everyone I've done has failed again within a matter of months.
Replacent head I'm afraid.
Martin

where do you get them from.

cheers tony.

Club 80-90 Forums

speedo

speedo

You'll be lucky

Re: You'll be lucky