help wiring aaz engine please? can anyone assist more please

Post by **shoooom** » 05 Feb 2008, 16:43

hi i have just bought a t25 on a Y plate, with the engine conversion half done...

i could do with some assistance on the wiring please????

the van used to be a 1.6d

any help at all would be great.

and hello to everyone (this is my first post)

Post by **g60steve** » 05 Feb 2008, 17:16

This could be of help:
https://club8090.co.uk/wiki/Al ... gine_1.9TD

And this:
http://www.brick-yard.co.uk/VehicleSpec ... ds/aaz.htm

And if not it should be somewhere in this lot.
http://www.brick-yard.co.uk/forum/searc ... OB=1&SPN=1

Post by **shoooom** » 05 Feb 2008, 18:19

cant look at the last link, it just comes up with "Sorry, only members with sufficient permission can access this page."

Post by **g60steve** » 05 Feb 2008, 18:22

Register and then you'll get sufficient permission.

Post by **shoooom** » 05 Feb 2008, 18:24

i have mate

Post by **g60steve** » 05 Feb 2008, 18:28

What just now or you have been for a while?

Post by **shoooom** » 05 Feb 2008, 18:33

registerd a while ago, but not used the account...requested a new password yesterday. it lets me post, but i cant read certain things..

Post by **g60steve** » 05 Feb 2008, 18:37

Are you registered under the same name as here but with 3 o's missing?

Post by **ELVIS** » 05 Feb 2008, 18:53

what wiring are you needing sorted/how much was removed/damaged etc etc etc ?
you should have the battery and alternator wiring - pretty obvious what goes where on that front .
then you should have a whole bunch of thin guage wires with male spade connectors on and a heavier red one that come from the engine bay near the black plastic box .

the heavier red ones goes onto the first glow plug, they are all then connected in series with a brass bar.

(im deserately trying to remember colours now and failing miserably)
IIRC

Black - fuel cut off solenoid (male spade on injector pump)

you will have 2 oil pressure senders (yellow goes ontop of oil filter and other colour - green or blue maybe ? goes at front of head near temp senders) and 2 temp senders (yellow/red- goes at 'front of head' nearest gearbox. and Red - side of head near to pump) .
will dig me haynes out and see if i can find colours for ya , unless anyone else can step in ?
dont take this as gospel as it could be bo**ox as i memory is crap but i think its not far off the mark.

Post by **shoooom** » 05 Feb 2008, 18:53

YEA MATE, BUT CANT DO ANYTHING (READ OR POST) WITH THAT ACCOUNT

Post by **shoooom** » 05 Feb 2008, 18:58

THANKS ELVIS!!!!!

Post by **shoooom** » 27 Feb 2008, 12:02

can anyone help anymore please?

Post by **Chilla** » 27 Feb 2008, 13:22

Shooom- I have the same problems trying to register with the same site

Just converted my 1.6td to 1.9td using a slightly different injector pump but every thing should be the same Ive got the vehicle outside so could through it with you.
pm'd you a phone number.