Low oil pressure 1600TD JX

Big lumps of metals and spanners.

Moderators: User administrators, Moderators

Locked
belgianbill
Registered user
Posts: 31
Joined: 18 Oct 2006, 19:24
80-90 Mem No: 2954
Location: Sutton Surrey

Low oil pressure 1600TD JX

Post by belgianbill »

Just finished rebuilding my JX with brand new cylinder head and recon turbo. On start up all OK but after driving for 7-8 miles from cold the oil pressure warning light flashes on idle - below about 1000 rpm. As soon as the engine revs build the light goes out and stays out. Have replaced the pressure switch in the back of the head (twice) but no joy. Anybody any ideas?
Thanks for a great club guys!
My other car is a bus
Member no.2954

User avatar
Westy.Club.Joker
Registered user
Posts: 484
Joined: 18 Sep 2006, 19:37
80-90 Mem No: 2863
Location: Sunny Lancs. 1988 1.6TD Westfalia Club Joker pop-top

Post by Westy.Club.Joker »

Have you tested whether it is actually low oil pressure? How many miles has the bottom end done? It does sound like it could be worn bearing shells. :(

Whip the sump off, check the oil pump pick-up gauze isn`t full of cr*p, then it`s down to pulling off a few bearing caps and checking the bearing shells to see if they are worn (copper showing through the white metal), also worth pulling the oil pump down and opening it up to check if its worn as well.

Do`nt want to be running a new turbo with low oil pressure or it won`t last long :oops
Keep it real.


Search first - ask second ;>}

belgianbill
Registered user
Posts: 31
Joined: 18 Oct 2006, 19:24
80-90 Mem No: 2954
Location: Sutton Surrey

Post by belgianbill »

Thanks for that - depressing as it might be! I have no history with the engine so no idea how many million miles its done. HOwever it souns sweet when running and pulls well - just this blesed light at low revs when hot!
Back to the drawing board
My other car is a bus
Member no.2954

User avatar
Westy.Club.Joker
Registered user
Posts: 484
Joined: 18 Sep 2006, 19:37
80-90 Mem No: 2863
Location: Sunny Lancs. 1988 1.6TD Westfalia Club Joker pop-top

Post by Westy.Club.Joker »

Try and blag an oil pressure gauge from someone to check if it is actually low, or it`s a dodgy wire or sender.
Keep it real.


Search first - ask second ;>}

belgianbill
Registered user
Posts: 31
Joined: 18 Oct 2006, 19:24
80-90 Mem No: 2954
Location: Sutton Surrey

Post by belgianbill »

Yeah will do. What should the pressure be?
My other car is a bus
Member no.2954

andysimpson
Registered user
Posts: 213
Joined: 19 Oct 2005, 21:15
80-90 Mem No: 0
Location: Chorley, Lancs

Post by andysimpson »

belgianbill wrote:Yeah will do. What should the pressure be?

Minimum 2 bar at 2000revs at oil temp of 80 degrees.

belgianbill
Registered user
Posts: 31
Joined: 18 Oct 2006, 19:24
80-90 Mem No: 2954
Location: Sutton Surrey

Post by belgianbill »

Cheers Andy
My other car is a bus
Member no.2954

dave friday
Registered user
Posts: 804
Joined: 15 Oct 2006, 11:19
80-90 Mem No: 5533
Location: rambler de oria, near albox,almeria,spain

Post by dave friday »

mine used to flicker[when very hot] at .6 bar [sender on front of cylinder head] would go out when engine cooled.since new big end and main bearings, and new oil pump, the light stays off.
I dont think, so I'm not[do I exist?]
1992 1600td [ jx ] syncro panel van[leisuredrive camper ]

andysimpson
Registered user
Posts: 213
Joined: 19 Oct 2005, 21:15
80-90 Mem No: 0
Location: Chorley, Lancs

Post by andysimpson »

Do not check oil pressure on head, thats always low even on a healthy engine, check on oil filter bracket.

Locked