Governed Dizzy Rotor - why?
Moderators: User administrators, Moderators
- Shipdrives
- Registered user
- Posts: 2
- Joined: 21 Sep 2006, 11:39
- 80-90 Mem No: 1771
- Location: Ferndown, Dorset.
Governed Dizzy Rotor - why?
- toomanytoys
- Trader
- Posts: 2872
- Joined: 11 Oct 2005, 18:37
- 80-90 Mem No: 41
- Location: Boston area, South Lincolnshire
All t25's had them.. it was a cheap anti abuse device...
I have run a normal beetle rotor for years.. it all depends on your mechanical sympathy zand who might drive it.. if other people do then you might want to retain the limiter.. or as can happen, if the throttle cable jambs/the throttle sticks open/etc,etc, it will prevent your engine from exploding before you switch it off...
I have run a normal beetle rotor for years.. it all depends on your mechanical sympathy zand who might drive it.. if other people do then you might want to retain the limiter.. or as can happen, if the throttle cable jambs/the throttle sticks open/etc,etc, it will prevent your engine from exploding before you switch it off...
- Shipdrives
- Registered user
- Posts: 2
- Joined: 21 Sep 2006, 11:39
- 80-90 Mem No: 1771
- Location: Ferndown, Dorset.
- Dan Wood
- Registered user
- Posts: 667
- Joined: 04 Dec 2005, 12:02
- 80-90 Mem No: 2309
- Location: Port Erin, Isle of Man
toomanytoys wrote:if the throttle cable jambs/the throttle sticks open/etc,etc, it will prevent your engine from exploding before you switch it off...
My throttle stuck fully open as I was accelerating away from lights. Engine screamed a big scream as I dipped the clutch to go from 2nd to 3rd....
I had solid rotor arm. Engine had to go to Mr. Baxter for the rockers putting back on....
- Shipdrives
- Registered user
- Posts: 2
- Joined: 21 Sep 2006, 11:39
- 80-90 Mem No: 1771
- Location: Ferndown, Dorset.
Thanks guys.
After reading the above comments, the existing governed rotor arm is probably a safer bet. My other bus is an automatic so there's never been a problem with engine racing between gear changes - or when it's in gear for that matter....!
My air-cooled bus is in Spain and the engine's currently being rebuilt by my son-in-law so next year (hopefully) I'll only have to fly out & it'll be ready to go...!!
After reading the above comments, the existing governed rotor arm is probably a safer bet. My other bus is an automatic so there's never been a problem with engine racing between gear changes - or when it's in gear for that matter....!
My air-cooled bus is in Spain and the engine's currently being rebuilt by my son-in-law so next year (hopefully) I'll only have to fly out & it'll be ready to go...!!