Governed Dizzy Rotor - why?

Big lumps of metals and spanners.

Moderators: User administrators, Moderators

Locked
User avatar
Shipdrives
Registered user
Posts: 2
Joined: 21 Sep 2006, 11:39
80-90 Mem No: 1771
Location: Ferndown, Dorset.

Governed Dizzy Rotor - why?

Post by Shipdrives »

:?: Does anyone know why my 1985 water-cooled 1900 engine has (what I think is) a governed distributor rotor (i.e a spring operated contact)? My previous air-cooled had a normal rotor. :?

User avatar
kevtherev
Registered user
Posts: 18832
Joined: 23 Oct 2005, 20:13
80-90 Mem No: 2264
Location: Country estate Wolverhampton Actually

Post by kevtherev »

stops the over reving from lead feet..as it has no rev counter red line is set in the gov'ner
you can replace it with a normal one
AGG 2.0L 8V. (Golf GTi MkIII)

User avatar
toomanytoys
Trader
Posts: 2868
Joined: 11 Oct 2005, 18:37
80-90 Mem No: 41
Location: Boston area, South Lincolnshire

Post by toomanytoys »

All t25's had them.. it was a cheap anti abuse device...

I have run a normal beetle rotor for years.. it all depends on your mechanical sympathy zand who might drive it.. if other people do then you might want to retain the limiter.. or as can happen, if the throttle cable jambs/the throttle sticks open/etc,etc, it will prevent your engine from exploding before you switch it off...

User avatar
Shipdrives
Registered user
Posts: 2
Joined: 21 Sep 2006, 11:39
80-90 Mem No: 1771
Location: Ferndown, Dorset.

Post by Shipdrives »

:D Many thanks for the quick replies - Bugger, I could've kept the new solid rotor I bought instead of giving it away.....! :evil:

User avatar
Dan Wood
Registered user
Posts: 667
Joined: 04 Dec 2005, 12:02
80-90 Mem No: 2309
Location: Port Erin, Isle of Man

Post by Dan Wood »

toomanytoys wrote:if the throttle cable jambs/the throttle sticks open/etc,etc, it will prevent your engine from exploding before you switch it off...

My throttle stuck fully open as I was accelerating away from lights. Engine screamed a big scream as I dipped the clutch to go from 2nd to 3rd....

I had solid rotor arm. Engine had to go to Mr. Baxter for the rockers putting back on....

User avatar
Shipdrives
Registered user
Posts: 2
Joined: 21 Sep 2006, 11:39
80-90 Mem No: 1771
Location: Ferndown, Dorset.

Post by Shipdrives »

Thanks guys.

After reading the above comments, the existing governed rotor arm is probably a safer bet. My other bus is an automatic so there's never been a problem with engine racing between gear changes - or when it's in gear for that matter....!

My air-cooled bus is in Spain and the engine's currently being rebuilt by my son-in-law so next year (hopefully) I'll only have to fly out & it'll be ready to go...!! :lol:

User avatar
CovKid
Trader
Posts: 8411
Joined: 30 Apr 2006, 13:19
80-90 Mem No: 3529
Location: Ralph - Coventry (Retired)
Contact:

Post by CovKid »

Mines governed. Saved my bacon many times when I've got the stereo on full blast and not paying attention to which gear I'm in - also fun when you go screaming along to overtake and get that sudden drop like pulling the plug on a vacuum cleaner.

Locked