hi have a roma? conversion on my 1.9 dg engine any one know how i can increase the idle speed as it stalls when trying to tick over
is this simple or do i need to see a mechanic
any advice would be grateully recieved
thanks
bartlby bus
1.9
a reg auto sleeper
lpg idle speed
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 32
- Joined: 29 Dec 2006, 19:42
- 80-90 Mem No: 4001
- Location: Bristol
-
- Registered user
- Posts: 213
- Joined: 19 Oct 2005, 21:15
- 80-90 Mem No: 0
- Location: Chorley, Lancs
-
- Registered user
- Posts: 32
- Joined: 29 Dec 2006, 19:42
- 80-90 Mem No: 4001
- Location: Bristol
- toomanytoys
- Trader
- Posts: 2867
- Joined: 11 Oct 2005, 18:37
- 80-90 Mem No: 41
- Location: Boston area, South Lincolnshire
The carb on DG's doesnt usually "wear" its down to poor adjustment and leaks.. a rebuild kit usually cures most issues..
The LPG.. well beter to go see a GOOD lpg person.. Gasure should be able to help, but may not be close to you..
You could tweak up the carb idle setting a fraction.. and live witht he slightly high idle on petrol...
The LPG.. well beter to go see a GOOD lpg person.. Gasure should be able to help, but may not be close to you..
You could tweak up the carb idle setting a fraction.. and live witht he slightly high idle on petrol...
-
- Registered user
- Posts: 142
- Joined: 20 Oct 2005, 15:27
- 80-90 Mem No: 0
- Location: KILWINNING, AYRSHIRE, SCOTLAND
Card has nothing to do with tick over on lpg on my conversion. set the tick over the normal way on petrol. for gas mines has a couple of adjusters on vaporiser. black knob and screw. if i remember right, it's late and i've had a few, if yours has same, tighten screw til closed then turn black knob on top of vaporiser until van is ticking over at a healthy rpm. tick over on gas is normally a wee bit faster than petrol to stop it cutting out at speed when coasting
i may have got that in the wrong order, if so someone will be along soon to correct me

i may have got that in the wrong order, if so someone will be along soon to correct me

Why pay someone else to fix it for you when you can waste 2 months doing it yourself!