reconditioned carb?

Big lumps of metals and spanners.

Moderators: User administrators, Moderators

Locked
woody1977
Registered user
Posts: 72
Joined: 03 May 2006, 13:08
80-90 Mem No: 3077
Location: DARTFORD

reconditioned carb?

Post by woody1977 »

hi guys.

i have had my van in for a bit of welding and mot. it is to the point where everything has been sorted except the emmissions are too high to pass, the mechanic has suggested a new carb.. but he has said they are £450 from the main dealer, and i'm not paying that..


is there anywhere that sell recons on a exchange basis? my van is a 1.9 watercooled.

thanks,
matt.

User avatar
toomanytoys
Trader
Posts: 2872
Joined: 11 Oct 2005, 18:37
80-90 Mem No: 41
Location: Boston area, South Lincolnshire

Post by toomanytoys »

unless you have space ship miles.. the pierburg carb you have wont be worn out.. it prob would benefit from a rebuild kit and making sure all of the vac pipes and vac units are working correctly..

GSF do the kits...

woody1977
Registered user
Posts: 72
Joined: 03 May 2006, 13:08
80-90 Mem No: 3077
Location: DARTFORD

Post by woody1977 »

o.k.

would the carb be responsible for the emissions mot failure, or is the mechanic pulling my chain and trying to make a quick buck?

and is it an easy job refurbing the carb with the kit?

thanks.

User avatar
gwolf65
Registered user
Posts: 8
Joined: 14 Sep 2006, 19:49
80-90 Mem No: 2912
Location: cumbria

carb problem

Post by gwolf65 »

I had a similar problem with my emissions.Luckily i managed to adjust the co so the hydrocarbons came down enough to pass.Probably wont manage this feat again next year.Found this guy who can repair them,haven't tried him yet though.Check his website http://www.gasure.co.uk/carbrefurb.htm ,surely if he can do it there must be someone near you who does?If not have a day out and go and see him?
member number 2912

woody1977
Registered user
Posts: 72
Joined: 03 May 2006, 13:08
80-90 Mem No: 3077
Location: DARTFORD

Post by woody1977 »

thanks, that would have been perfect, but its 4 hours from me.
if the van manages to pass its retest today, i can make it down to chester to get them done, but if it fails the emision test, then i'm stuck as i wont be able to get it there.

does anyone know of anyone who refurbs carbs closer to kent/london?

User avatar
trickydicky
Registered user
Posts: 135
Joined: 15 Apr 2006, 14:57
80-90 Mem No: 2566
Location: Cheltenham Membership No.2566

Post by trickydicky »

www.carburettorspecialists.com
Not a million miles away, he will also sell you a kit if you want.
It's nothing a great deal of time and money can't fix
86' 1.9 D.G. Autosleeper poptop in white.

User avatar
toomanytoys
Trader
Posts: 2872
Joined: 11 Oct 2005, 18:37
80-90 Mem No: 41
Location: Boston area, South Lincolnshire

Post by toomanytoys »

Yes the carb is responsible (unless you have low compression) for poor emissions, fresh oil and a blast up the bypass can clear out any crud... make sure its been run a good distance to get it up to temp.. he ought to be able to tweak it down too... My doka sits at 0.6 CO when it went for its test...

Willoughby
Registered user
Posts: 545
Joined: 23 Oct 2006, 19:59
80-90 Mem No: 3068
Location: Livingston, Scotland, UK
Contact:

Post by Willoughby »

Hi

Steve at http://www.gasure.co.uk/ will service your carbs, Drop him a PM and he will let you kow the price.

Kev

User avatar
trickydicky
Registered user
Posts: 135
Joined: 15 Apr 2006, 14:57
80-90 Mem No: 2566
Location: Cheltenham Membership No.2566

Post by trickydicky »

Not trying to take the work away from Steve, Buttttttt I reconditioned my carb with one of the kits and well to be fair it was easy.
It's nothing a great deal of time and money can't fix
86' 1.9 D.G. Autosleeper poptop in white.

woody1977
Registered user
Posts: 72
Joined: 03 May 2006, 13:08
80-90 Mem No: 3077
Location: DARTFORD

Post by woody1977 »

thanks for all your replys guys, all very helpful.

i will find out at 2pm today if it has passed at the second try.. if it has, it will still need sorting for next time.

gasure sounds great, but its a bit far for me.

gower and lee in watford still do a postal service and have quoted me £134 excluding vat and postage.

or i can have a go myself.... ?? how easy is it to do DIY? and will it just be a temp fix and need doing properly after another six months?

woody1977
Registered user
Posts: 72
Joined: 03 May 2006, 13:08
80-90 Mem No: 3077
Location: DARTFORD

Post by woody1977 »

well, the van passed its mot and emissions test, by the skin of its teeth. it runs o.k. but def needs a carb rebuild in the near future.

thanks for all the help and info.

Matt.

Locked