manula choke for twin solex carbs

Post by **mattrsa** » 10 Sep 2007, 15:15

Is there such a thing? The auto choke on mine does not seem to be working.

Thanks in advance

Post by **jason k** » 10 Sep 2007, 16:18

the auto choke can be adjusted.
is it open or shut??
i dont think anyone does a manual kit for em.

Post by **mattrsa** » 10 Sep 2007, 19:42

it seems to get stuck open when i start it and then it runs rich for ages before eventually settling down to a fairly normal idle

Post by **jason k** » 10 Sep 2007, 20:35

if its open then its not working , prob some one has tweaked the mixture to make it run. if you undo the three screws on the side of the carb by the choke you can rotate it it to engage the choke. adjust it soz the choke just closes.

Website · Post by **syncrosimon** » 11 Sep 2007, 08:19

On an old twin solexed bay I used to run I just wound the choke flap fully open and disconected the wires so that she ran with no choke. I was livin in Aberdeen at the time in the winter, she would start first time, i would sit with her ticking over for about 30 seconds and away I would go. No problem. Much better hot starting after that aswell.

simon.