gearshift kit

Big lumps of metals and spanners.

Moderators: User administrators, Moderators

Locked
thenaylortribe
Registered user
Posts: 163
Joined: 09 Jan 2007, 08:40
80-90 Mem No: 3574
Location: Chandlers Ford, Hampshire

gearshift kit

Post by thenaylortribe »

does anyone know where I can buy a gearshift repair kit - the bit that is under the rubber boot in the cab appears worn. I have tgaken it apart, cleaned and greased and its a little better, but the shift rod is rubbing on the carrier box (if that makes sense) and making shifting difficult..I think somethings dropped as its only started today!..on the way back from MOT station

booted
Registered user
Posts: 33
Joined: 29 Mar 2007, 18:34
80-90 Mem No: 3712
Location: Luton, Club 80-90 mem no 3712,

Post by booted »

got mine from brickwerks and a short shift kit at the same time makes a big difference

User avatar
hammy44
Registered user
Posts: 104
Joined: 04 Apr 2006, 19:25
80-90 Mem No: 3462
Location: 3462

Post by hammy44 »

see below
Last edited by hammy44 on 18 May 2007, 21:02, edited 1 time in total.
jim
member 3462
1988 autohomes karisma 2.1dj

User avatar
hammy44
Registered user
Posts: 104
Joined: 04 Apr 2006, 19:25
80-90 Mem No: 3462
Location: 3462

Post by hammy44 »

just noticed one on fleabay tonight but they bought it for an Aircooled t25 dont know if it the same as t25 watercooled item no 260117537694
jim
member 3462
1988 autohomes karisma 2.1dj

thenaylortribe
Registered user
Posts: 163
Joined: 09 Jan 2007, 08:40
80-90 Mem No: 3574
Location: Chandlers Ford, Hampshire

Post by thenaylortribe »

Jim cheers...good spot !!!

Bidding today. :lol: :lol: :lol:

User avatar
toomanytoys
Trader
Posts: 2872
Joined: 11 Oct 2005, 18:37
80-90 Mem No: 41
Location: Boston area, South Lincolnshire

Post by toomanytoys »

You need to make sure all the rest of the bushes in the system are in good order too.. these usually have far more wear than the ball joint under the lever.. the ball where the linkage meets the gearbox also get worn... you can help reduce play near the box by losening themounting plate on the box and pushing the whole assy up.

A short shifter WILL NOT fix worn linkages... (I designed and manufacture the short shifters Birckwerks and a couple of other choice suppliers have.)

Also check the UJ in the centre of the linkage, several people have found this to come loose on its splines..

thenaylortribe
Registered user
Posts: 163
Joined: 09 Jan 2007, 08:40
80-90 Mem No: 3574
Location: Chandlers Ford, Hampshire

Post by thenaylortribe »

cheers for that. I'll check and grease these bushes tomorrow. I am now awaiting delivery of the ebay repair kit...Cheers again Jim.
Just as a bit of info I took apart my gearshift linkage below gearstick and found all the grease to be rock hard and powdery, so I took it to bits and regreased it all. Little bit better but new kit will give me peace of mind driving round Europe!!

Simon Baxter
Trader
Posts: 3148
Joined: 08 Oct 2005, 19:36
80-90 Mem No: 1
Location: Huddersfield, WeYo.
Contact:

Post by Simon Baxter »

... ebay thing says they paid £54 for it!
They are £30.31 plus VAT from VW!
:lol:
'86 VW T3 syncro panel
'89 VW T3 Westy Atlantic
'81 Porsche 924
SJ Baxter LTD/Brickwerks

Locked