Expert Help required please guys...

Post by **benross** » 07 Feb 2007, 18:01

Hey,

My friends 2.0 air cooled engine went in his T25 not so long ago.

He was told the engine was of code CJ, so he bought a replacement from big boys toys i think.

Now the engine has been removes its become apparent that its a CT engine code.

What 'bits' are required to allow him to replace the CT with the CJ that he has bought? Or, should it just drop in easily?

I look forward to your help. Cheers everyone,

Ben

Post by **kevtherev** » 07 Feb 2007, 18:07

well you'll need a complete water cooling system to attach to it

as its a water cooled engine

Post by **benross** » 07 Feb 2007, 18:43

Sorry for the mis-understanding. It is a CJ he has not a DJ!!!

So, can anyone help now?!

Thanks again,
Ben

PS- I will E D I T the rginal post!

Post by **toomanytoys** » 07 Feb 2007, 19:07

Er whats a CJ? a beetle one? if so, its gonna be a pig to fit as the CT (1600 Aircooled) is quite different really.. he may be lucky and all the cooling tin will come off ok and fit the other engine..

Its not going to be easy... it might be better to see if he can sell the engine on and get a 2L CU with all its bits on..

Post by **HarryMann** » 07 Feb 2007, 19:28

send it back and get the correct one ? Pay a misorder charge?

Post by **benross** » 07 Feb 2007, 19:29

Hi, thanks for the reply.

I was under the impression the CJ was a T2 engine. I saw it on this site:

http://www.type2.com/library/identifi/boxeng2.htm

I am not sure though- I am into the water-cooled really.

Thanks for your help

Post by **badger** » 07 Feb 2007, 20:35

If the engine which came out of the van is a CT, it's a 1.6litre not a 2 litre. Not sure what a CJ code engine is out of, but a 2litre CU will fit straight in i think.

Post by **Simon Baxter** » 07 Feb 2007, 20:57

CJ is a late bay 2.0l Aircooler type 4 motor.

Non of the parts are interchangeable between engines.

A CT engine is a 1.6l Aircooled T3 engine, like a type 1 motor but with a spin on oil filter and hydraulic tappets.

Seems your mate has been misinformed when he bought his van and was under the impression it was a 2.0l when infact it is a 1.6l engine.

The correct engine code for a 2.0l Aricooled engine for a T3 is CU.