Club 80-90 Forums

The 12N socket. The socket is coloured black and houses 7 pins which are are numbered 1 to 7 and need to be connected using the correct grade wiring as follows (1998 Pin Allocation).: Pin Cable Colour Function 1. Yellow Left turn signal 2. Blue Fog light's 3. White Earth 4. Green Right turn signal 5...

Hi I used the thin foam that you put under laminate floors got it from floors to go
Hope this helps
Regards wiggy

I agree with ringo I run a 1.9td aaz on a 5 speed box no problem with power or speed and no stink
regards wiggy

Get your self a roll of 6mm Kunifer from you local motor factors remove the origonal pipe ends from the old pipe then find someone to drill them out to suit the new diameter pipe and while they are at it get them to put a double flare on each end of the pipe .

cold start { choke }

Top left as you look at the rad
All the best wiggy

1/dose the electric fan cut in
2/ Red light flashing is coolant level sensor as the engine runs quicker it draws in more coolant check the level in the header tank .
3/ halfway on temp gage is about right
Hope this helps
wiggy

I cut 13mm of mine

Blaupunkt 4inch were fitted in my caravelle gl as standard equipment when new in 1985
all the best
wiggy

Glad you're sorted Well done for having a go

4 inch speakers got mine from halfords £20

you have pm

Get your self a roll of 6mm Kunifer from you local motor factors and cut it to length, remove the origonal pipe ends from the old pipe then find someone to drill them out to suit the new diameter pipe and while they are at it get them to put a double flare on each end of the pipe . Problem solved,,...

i have one also in gloucester , you probavbly have the early one half rubber , half metal . later use plastic one peice . pop over we can do a deal oh , look you havent put your location down on your profile and i dont know which part of the country you are in Thank you for replying I took Fritz ad...

i have a type 25 vw transporter van, 1.9 water cooled petrol, 1985, b reg. I am having serious trouble finding a replacement for the hydralic cluctch pipe, the one that screws directly into the clutch slave cylinder. Its bigger in diametre than the normal "break" pipe but has the same sort...