Club 80-90 Forums

All in about £35/£40, the caddy caps were from a breakers, hole saw, sealant and glue were lying round the workshop so the only big cost were the golf caps which were off ebay.

Cheers Andy

By 'standard wheels', do you mean vw steels? Second question, what is this different set up that ye speak of?[/quote] Yes vw steels and as for brake set up I have a South African Microbus and my Doka has all South African running gear from a written off Microbus so the front hub and discs are differ...

I've tried the caps on standard wheels and they fit the rears but the fronts would need spacers, it's fine on mine as I've got a different brake/hub set up on the front.

Cheers Andy e

I bought the steels as is, I think the previous owner must have removed them quite quickly and replaced them with alloys. I'm fortunate that my younger brother lives in Germany and speaks it very well so when he's got the time he looks out for parts for me. I've not tried them against a standard ste...

I thought I'd share this if it's of interest to anyone with Merc steels fitted. I've been looking for centre caps for my steels and made up these using 321601171A Mk1 Golf centre cap and 2K0601169 2003-onwards Caddy centre cap. All you need is a drill bit for a pilot hole, 76mm hole saw, black silic...

Simon,

Will you be selling the centre caps for the Mefros ?

Cheers Andy

Hmmm

There's this bike rack/ladder on a amercian site:

http://www.telusplanet.net/public/gary2 ... r2bike.htm

Cheers Andy e

Rob,

When did you buy your wheels cover. I've tried getting a 16" one and was told it was NLA, would really like to get hold of one.

Cheers Andy e

Ian,

I've got a complete loom out of a 10v Audi Ur quattro if you need bits I can send it up to you, also sure I've got an ISV round here somewhere, I'll have a look when I get home.

Cheers Andy

Try speaking to Phil Payne, he knows his stuff.

Phil Payne
http://www.isham-research.co.uk
+44 7833 654 800

Good luck sorting it out.

Cheers Andy e

Audi 200 turbo engine, I expect most of the electrical bits I've got would be no good as my bits are for a MB code 10v. You can always cross reference them on ETKA and find out what models share parts. Once my 10v is sold I won't have much use for the parts I've got.

Cheers Andy e

Wow should be good, really want to keep the heat down in the engine bay as that saps performance, it's bad enough in my Urs and the engine's are in the front of them. I was thinking of stuffing either a 136bhp n/a 10v or a 170bhp n/a 20v in my doka. What engine code is the turbo motor cos I've got a...

Thanks Ian, Im not having much luck finding one.

Cheers Andy e

Does anyone know where I can buy a recon AAP 5 speed box from without having an exchange unit.

Cheers Andy e