Club 80-90 Forums

I have the other type with non aligned inlet and was going to modify it but will see what JK say about the 'modification'.....and cancel the order if its daft!

Give them a ring....it either fits or it doesn't, can't modify it if the pipe fouls the oil filler! I've ordered one so will ring them.

Ordered one but may be out of stock.

GSF have them listed

https://secure.gsfcarparts.com/shop/shop.asp

JustKampers - 16-00 pounds

http://shop.justkampers.com/index.php/cPath/2_1023_1145

Earlier installations didn't require the LPG filter to incorporate a shut off solenoid and that may be the one he is refering to. They aren't expensive and it shouldn't cost too much to replace/update. Shop around if you can (once he tells you exactly what needs doing and gives you an estimate). My ...

Great! Give them a good clean and paint job.....will probably outlast the van!

Us teachers are experts in applying emulsion, its the only paint the kids can use these days (just as well when you see em paint ) .....and we get gallons of the stuff for free!

Try wire brushing them back and treating them but do not disturb any wires that go to the multivalve and do not force/disturb any 'pipes' that seem to connect to the tanks. LPG tanks are pretty durable but (and don't shoot the messenger!) , when you take the van in to the LPG people who are going to...

Long shot here, but most vans have a ECB (earth leakage breaker) unit usually close to the Hook up connector as it enters the van (in a cupboard?) and most have two switches that drop out in the event of a fault. One switch controls the feed to the 240V fridge, the other to any 240V sockets. Check t...

PVA is plenty strong enough for construction of the panels, should clamp to achieve max. strength of joint and leave for several hours. If you are building a frame then right angle brackets and screws will be needed to attach panels to the frame (not PVA). For ideas on interiors go here: http://www....

Have the same prob, if I do it twice in succession it goes into first no probs, do it once and its reverse most times. Think the linkage at the box is the problem on mine as I can see the 'white mushroom' and haven't got around to doing it since I discovered that doing it twice solved the problem......

Em, if it doesn't flash on switch on then the problem is more likely to be in the speedo cowling or the led is faulty. First question, does the temperature guage work? Also, have put info on how to check the coolant level/temperature circuit on the thread for ' flashing red light' in this forum. Ass...

No! The 185 R14's, standard tyre, slightly higher profile and the speedo is more accurate. As I said, I had a brand new set on the steels and transferred them to the ally's.

Put the standard tyres on my carat alloys to correct the speedo error, plus I had a new set on the steelys anyway.

Testing Coolant Circuit Wiring

Moved to last post.