Club 80-90 Forums

Well over lunch was thinking the ilde reminds me of another van of mine which is tdi'd and used to have the evry mod. If i wound the resistor right up the idle would get rougher and rougher because too much fuel... soo after lunch went back to this van and played with the fuel screw, wound it out, i...

Problem solved now

Update. Back on this van today. Shes running well on jx pump and standard 155 injectors. Drove nice but rough idle at warm. Ive advanced and retarded the pump seems it was good where it was. So moved to the fuel screw. Wind it in and it runs smoother but obviously idle goes up, and doesnt come back ...

Nobody know?

Yep.
Pull off line that feeds it from the reservoir
Remove hard line that exits it, either hard plastic one or solid metal one..
Two 13mm bolts
Job done !

So the vans off and running with the aaz pump, still, when i can would like to swap in the jx pump.
Can i just swap in the aaz camplate into the jx pump or there more to it than that?

Scratch last post it runs on the 1.9td pump and injectors! just the glow plug fuse had gone pop. Must have gone just this morning, had 12v at the plugs yesterday

Well before starting on other things this morning swapped in the 1.9td injectors and pump on it to get it out the way. The thing won't run at all now! Pushed it out of the way for now! Like the timing is out still but clearly not. Maybe take the head of and have a look see but has good compression d...

Diameter of the pulley doesn't matter as it'll be taken up when adjusting the belt tension. Run the single belt unless you arent already, makes life easier

I have read a lot of people say this and it makes sense, understand it.. but seems theres an equal amount of people out there that are running the jx pump without notable problems

If you dont have aircon or ps you should be able to fit any pulley
I think generally they're all double pulleys

Hey folks! Just finished a jx to aaz swap. Done before with no problems .. but this time using the jx pump so it fits in nice in the bay! Can't get the thing to run right, it's driving me mad! As it is I have jx pump and 155bar injectors. Takes a while to start from cold (timing to retarded??) and c...