Club 80-90 Forums

looking good keep us updated

that looks very much like a air line fitting to me. if it is not really designed for gas http://www.ebay.co.uk/itm/GENUINE-PCL-AIR-LINE-HOSE-TOOL-FITTING-COUPLING-CONNECTOR-1-4-BSP-MALE-THREAD-/190807429937?pt=UK_Air_Tools_and_Compressors&hash=item2c6d025331" onclick="window.open(this....

'tiger seal ' iv not found anything that it can't stick.

how old is your currant battery? have you had it load tested ???

they are made in china
the way they word the warranty is strange. 2 years legal warranty not two years parts warranty
but you never know could be fine

is it a turbo, non turbo ,sdi engine ?

the rubber seals over time can shrink and dry out sort of. if it is a only a drip you can get a treatment made by wynns which causes them to swell slightly, gives them a bit more life. it is about £9. i belive halfords or most factors can supply it. you just add it to the fliud and thats it . hoer t...

how much came out? a drip or are you topping up the fluid often ?

i use brake / clutch cleaner (about £10 from motor factors for 5 liters ) in a spray bottle leave to soak then wipe have all doors open and plenty of air and a dust mask

i would repalce at the same time they are cheap, cut them off new ones come with a alan key or torq drive at the end of the tread or two flats for a spanner to allow you to hold them while doing them up. when you get them it will be obvious. they can be tight on the thread so hitting with a hammer t...

basics first ,lots of WD40 and time let it soak in over a few hours .keep giving it a spray every now and then,if still no move. how much heat do you get on it ? i use a plumbers propane torch and get it red hot then shock with a hammer or impact gun