Difference between revisions of "Syncro links page"
| Line 35: | Line 35: | ||
=Syncro specific parts= | =Syncro specific parts= | ||
== Petrol tank straps == | |||
[http://www.kaefer-co.de/index.php?view=details&path=0.191.217.&size=large&id=2831 Syncro petrol tank straps in Stainless available here] | [http://www.kaefer-co.de/index.php?view=details&path=0.191.217.&size=large&id=2831 Syncro petrol tank straps in Stainless available here] | ||
Handbrake cables (VW part numbers): | == Handbrake cables == | ||
(VW part numbers): | |||
Left 251 609 701 D (1436mm) | Left 251 609 701 D (1436mm) | ||
| Line 43: | Line 46: | ||
Right 251 609 702 (1390mm) | Right 251 609 702 (1390mm) | ||
== Captive buts for fron bash-plate == | |||
'''GaryD:''' I tried my local dealer to get the M6 captive nuts which are used to hold the protection plate which mounts between the front bumper and the front suspension frame. They told me they were no longer available. CJ & Brickyard confirmed this. | |||
A chance comment led to the information that the under-engine tray of the Passat (year 2000 was suggested) uses similar fixings. A further enquiry with the dealer confirmed this and an order has produced the ten needed. They seem to be essentially identical to the Transporter fixings. | |||
Part number is N-901-686-04 and they are 64p each. | |||
Hope this is helpful. | |||
'''Simon Baxter:''' Problem is the width, any "normal" fixing, spire(speed) clip sort of thing are too wide to fit the VW hole. | |||
I think Wurth do some narrow ones but any normal nut and bolt place will struggle. | |||
Drill and rivnut them, use hex head, integral washer self tappers with speed (spire) clips for the sides, the back three are M8 x 16 ish with a repair washer! | |||
==Accelerator cable == | |||
RHD syncro 2.1 DJ accelerator cable = 3700mm part number 252 721 555 R | RHD syncro 2.1 DJ accelerator cable = 3700mm part number 252 721 555 R | ||
Revision as of 20:31, 7 October 2007
Repairs and Maintenance
- Dos and don'ts
- VC removal and refitting
- Prop shaft removal and refitting
- Prop shaft bush replacement
- Fuel Filter
- Petrol tank
- Syncro locker actuators removal
- Speedo diff drive gear replacement
- Front outer CVJ repair
- Front outer CVJ seals
- Gearbox and diff oil
- CV Boots - Front
Chassis
Wheels and Tyres
- Tyres explained
- How big can I go
- Alternative rims and tyre combinations
- Syncro tyre rotation
- Tyre size/Gear ratio optimisation
Suspension
Specifications
Syncro specific parts
Petrol tank straps
Syncro petrol tank straps in Stainless available here
Handbrake cables
(VW part numbers):
Left 251 609 701 D (1436mm)
Right 251 609 702 (1390mm)
Captive buts for fron bash-plate
GaryD: I tried my local dealer to get the M6 captive nuts which are used to hold the protection plate which mounts between the front bumper and the front suspension frame. They told me they were no longer available. CJ & Brickyard confirmed this.
A chance comment led to the information that the under-engine tray of the Passat (year 2000 was suggested) uses similar fixings. A further enquiry with the dealer confirmed this and an order has produced the ten needed. They seem to be essentially identical to the Transporter fixings.
Part number is N-901-686-04 and they are 64p each.
Hope this is helpful.
Simon Baxter: Problem is the width, any "normal" fixing, spire(speed) clip sort of thing are too wide to fit the VW hole. I think Wurth do some narrow ones but any normal nut and bolt place will struggle. Drill and rivnut them, use hex head, integral washer self tappers with speed (spire) clips for the sides, the back three are M8 x 16 ish with a repair washer!
Accelerator cable
RHD syncro 2.1 DJ accelerator cable = 3700mm part number 252 721 555 R
