Correct RPM rotor RM (CUT OUT) FOR 2 Litre Cu engine

An alchemy of sparks, copper wire and earth

Moderators: User administrators, Moderators

Locked
Albatross
Registered user
Posts: 8
Joined: 27 Dec 2010, 14:33
80-90 Mem No: 9094
Location: Nr Leicester

Correct RPM rotor RM (CUT OUT) FOR 2 Litre Cu engine

Post by Albatross »

Was a rotor arm with rev limiter fitted to a 2 litre CU engine with electronic ignition ? if so what RPM ?
Albatross

California Dreamin
Registered user
Posts: 2673
Joined: 03 Apr 2007, 12:54
80-90 Mem No: 8386
Location: Nottingham

Re: Correct RPM rotor RM (CUT OUT) FOR 2 Litre Cu engine

Post by California Dreamin »

5,400rpm..... :ok

http://www.brickwerks.co.uk/shop?page=s ... ory_id=122" onclick="window.open(this.href);return false;

Martin
1989 California 2.1MV

Albatross
Registered user
Posts: 8
Joined: 27 Dec 2010, 14:33
80-90 Mem No: 9094
Location: Nr Leicester

Re: Correct RPM rotor RM (CUT OUT) FOR 2 Litre Cu engine

Post by Albatross »

Thanks for that, I'd bought a new one but wasn't sure it was right.
Albatross

California Dreamin
Registered user
Posts: 2673
Joined: 03 Apr 2007, 12:54
80-90 Mem No: 8386
Location: Nottingham

Re: Correct RPM rotor RM (CUT OUT) FOR 2 Litre Cu engine

Post by California Dreamin »

Stretch the spring a bit to lower the cut out rpm :lol: just to stop over reving which is so easily done with these having the engine at the back (especially in campers where the back is covered in sound deadening matresses and clobber).

Martin
1989 California 2.1MV

Locked