mercedes clk 17 inch alloys
Moderators: User administrators, Moderators
-
dave lfc
- Registered user
- Posts: 372
- Joined: 27 Nov 2010, 12:14
- 80-90 Mem No: 9021
- Location: liverpool
mercedes clk 17 inch alloys
hi just got some mercedes clk alloy wheels with an 8j et 30 stamped on the wheels.now i have just found out the lug holes on the wheels only take 12mm bolts and the t25 takes 14mm, do i need to drill these out,is this an easy job any help/tips would be gratefull,cheers dave
its better to burn out than to fade away 1.9 dg petrol transporter1988
-
kevtherev
- Registered user
- Posts: 18832
- Joined: 23 Oct 2005, 20:13
- 80-90 Mem No: 2264
- Location: Country estate Wolverhampton Actually
Re: mercedes clk 17 inch alloys
tyres off and I would take them to my local engineering shop.
Or using a pillar drill and the wheel secured with the bit at high speed as it will snag. Accuracy is very important, as you can imagine.
what about the centers?
Or using a pillar drill and the wheel secured with the bit at high speed as it will snag. Accuracy is very important, as you can imagine.
what about the centers?
AGG 2.0L 8V. (Golf GTi MkIII)
-
dave lfc
- Registered user
- Posts: 372
- Joined: 27 Nov 2010, 12:14
- 80-90 Mem No: 9021
- Location: liverpool
Re: mercedes clk 17 inch alloys
centers are ok 66.6mm,cheers dave
its better to burn out than to fade away 1.9 dg petrol transporter1988