Fitting a kick panel under the back seat.

Post by **Zebedee** » 24 Dec 2011, 10:57

My caravelle doesn't have a kickpanel under the back seat so i'm going to make one from ply.

How do they ususally attach to the seat frame or are they just a snug push fit?

Post by **Mickyfin** » 24 Dec 2011, 11:55

There are two metal retainers that clip onto the two seat legs. Similar to the metal clip found on the lower steering column plastic shroud that clips to the steering column itself.

Post by **Zebedee** » 27 Dec 2011, 11:19

Cheers. I assume that would be attached to the kickpanel?
I think i've got some of these spring clips kicking about so i'll see if i can use them.

Post by **Mickyfin** » 27 Dec 2011, 12:54

Those are the ones.

Post by **Zebedee** » 19 Feb 2012, 18:04

Finally got my kickpanel trimmed and fitted.

Not too bad considering it is made of scrap.

Club 80-90 Forums

Fitting a kick panel under the back seat.

Fitting a kick panel under the back seat.

Re: Fitting a kick panel under the back seat.

Re: Fitting a kick panel under the back seat.

Re: Fitting a kick panel under the back seat.

Re: Fitting a kick panel under the back seat.