_
also, this is the hose i want to connect up to the fridge. could anyone explain these two brass gas taps on the left and right, is one for the fridge and one for the other things running off one bottle?:
_
this is the connector on the end of this hose at the moment. i take it that this will not screw on directly to the thread coming out of the back of the fridge on picture 1? it looks like a piece of copper pipe has been cut off this connector:
_
another question, (thanks for your help) there is a range of motion on the flue thing at the back, is this normal? it seems to be riveted on each side but there's play there:
_
the following picture is the back of the fridge, with the black and red bullet spades for the 12v, what do these normally go into, a fuse box of some sort, could you show me a link to one that you would use? and any details of bits that i will need to get this going:
_
these are the bits i have so far:
_
basically, i don't even know if this fridge works, and i am at the start of putting it in the van, i have the pdf for it, refers to drilling the hole to allow gas to escape and installing it into a cupboard. any advice and help is greatly appreciated, and any pictures of how your flue bit is installed into the side of your van would be appreciated also.
