I have problems with the indicator dash warning light not working. Now indicators packed up. Hazzards work fuse ok any ideas?
Kev
indicators dont work at all now
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 26
- Joined: 07 Feb 2011, 10:27
- 80-90 Mem No: 9208
- Location: Gloucester
indicators dont work at all now
VW T25 Autosleeper 1.9dg
- VWCamperfan
- Registered user
- Posts: 993
- Joined: 08 Jul 2007, 19:47
- 80-90 Mem No: 4000
- Location: Sheerness, Kent.
Re: indicators dont work at all now
Try some switch cleaner and lubricant in the hazard switch. If you dont have any to hand, WD40 can be your friend here!
The indicators run through the hazard switch and although the 'on' position of the switch can make the hazards work, the 'off' position, which connects your indicator switch to the lights, may not be making good contact.
The indicators run through the hazard switch and although the 'on' position of the switch can make the hazards work, the 'off' position, which connects your indicator switch to the lights, may not be making good contact.
Mark.
I'm Not A Complete Idiot... Some Bits Are Missing!
1.6 Modified CT engine.
I'm Not A Complete Idiot... Some Bits Are Missing!
1.6 Modified CT engine.
- ewenmaclean
- Registered user
- Posts: 293
- Joined: 16 Nov 2006, 19:32
- 80-90 Mem No: 7306
- Location: Edinburgh
Re: indicators dont work at all now
I second that advice - as already suggested in your previous post....
-
- Registered user
- Posts: 26
- Joined: 07 Feb 2011, 10:27
- 80-90 Mem No: 9208
- Location: Gloucester
Re: indicators dont work at all now
Cheers guys . I have stripped hazzard switch cleaned all contacts and refitted. Indicators work again. warning lamp on dash still not working on indicators only on hazzards but i can still drive her.
Cheers agian
Kev and Lorraine
Cheers agian
Kev and Lorraine
VW T25 Autosleeper 1.9dg