vac advance (CU)

[very_bland]

2.0l AC CU
standard DVDA dizzy and standard solex 32-34 PDSIT carbs

How do all, just a quick one... I've just got a duel vad dizzy and I could do with some help, need to know where all the vac advance hoses plug in, from pictures I can gather that:

from the 2 connectors on the air filter box, the one on the left goes to a T-piece, then off that to the balance bar and the connector on the vac advance on the dizzy (the one on the back of it), the one on the right goes to the connector at the back of the air box, into the unit where the big air hose connects, and from left hand carb to the other connector on the vac advance.

firstly is the above all correct, and secondly do I just block off the right hand carb as i did when i had it running with the single vac dizzy?

cheers,
Billy

[Footprint]

Vacuum hose on left carb goes to right hand vacuum connection on distributor, (the upward pointing stub on the cone shaped side). Connection from left hand connector on airbox , (via tee piece to balance pipe from behind airbox), goes to left hand connection on distributor, (sideways pointing stub on the flat side).

Vacuum connector on right carb should be blanked off.

[very_bland]

Brilliant, cheers footprint!