van restoration nearly done need help

An alchemy of sparks, copper wire and earth

Moderators: User administrators, Moderators

Locked
Woody67
Registered user
Posts: 0
Joined: 26 Apr 2011, 09:57

van restoration nearly done need help

Post by Woody67 »

my bus is just back from the bodyshop ,been away for 4 months!! its looking superb though loads of new panels rot cut out and total respray, im now trying to refit the interior etc so i have a few questions if anyone can help me, my two number plate lights are goosed and i believe vw caddy ones are thew same is thius right and where can i get two of the complete units?

User avatar
Titus A Duxass
Registered user
Posts: 5777
Joined: 24 Nov 2007, 08:22
80-90 Mem No: 4475
Location: Cologne

Re: van restoration nearly done need help

Post by Titus A Duxass »

If nobody comes up with some you can get them from VW Classic Parts.
There are two types
Kennzeichenleuchte - Number plate light
Art.: 481943021A
Kennzeichenleuchte
Hersteller: HELLA - Manufacturer

Dieser Artikel ist geeignet für: This article fits on:
Jetta 1 80-84
Scirocco 2 81-92
Passat 32/32b 75-88
VW-Bus T3

8,38 EUR inkl. MwSt., zzgl. Versandkosten

and

Kennzeichenleuchte
Art.: 481943121
Glas für Kennzeichenleuchte

Dieser Artikel ist geeignet für:
VW-Transporter T3
NUR Pritsche und DoKa
Alle Modelljahre

4,41 EUR inkl. MwSt., zzgl. Versandkosten
VW T3 GTi Camper 2,0l

User avatar
bigherb
Registered user
Posts: 2581
Joined: 27 Mar 2008, 13:50
80-90 Mem No: 5789
Location: West Kent

Re: van restoration nearly done need help

Post by bigherb »

If you just need the bulb holder and lens not the housing or rubber seal, Golf Mk1 use the same.
1982 Camper 1970 1500 Beetle Various Skoda's, Ariel Arrow

Cruz
Registered user
Posts: 3919
Joined: 12 Oct 2005, 10:40
80-90 Mem No: 2092

Re: van restoration nearly done need help

Post by Cruz »

Like bigherb says. If you still have the plastic holder you can get new lights to screw to it from gsf both on their website or on ebay

Number plate light

Picture of number plate light holder

The gsf light just screws to the plastic holder. If you don't have them then try looking at /asking http://www.wagonbuild.com" onclick="window.open(this.href);return false; as they are no longer available new.

Locked