Page 1 of 1

Doka jagdwagon welding.

Posted: 30 Mar 2011, 21:01
by Plasticman
Im doing the front panal on the above, Its a LHD so as Ive taken (half cut) the bashplate off to get at stuff, I will remake the captive nuts to aid future servicng etc I took a few picks, yep youve all been under yours but as its lhd and beleived factory original on 16"rims am posting these few picks up if its of any use to anyone.
Image
Image
Image
Image
what are the 2 tube stubs that come out the back of the fan motor?
Mike

Re: Doka jagdwagon welding.

Posted: 30 Mar 2011, 21:23
by futbus
They could be used for cooling, but on T3`s there never used.

Re: Doka jagdwagon welding.

Posted: 30 Mar 2011, 21:24
by Aidan
air :ok

Re: Doka jagdwagon welding.

Posted: 30 Mar 2011, 21:35
by toomanytoys
Seen hoses connected to them on turbo Audi's , 1 connected to the airbox and the other to the front of the car.. it draws cold air in from the front to cool the motor.. Turbo engines would rely on the fan a bit more.... :ok

Re: Doka jagdwagon welding.

Posted: 30 Mar 2011, 22:25
by Plasticman
Thanks, learn something every day
mike :ok

Re: Doka jagdwagon welding.

Posted: 31 Mar 2011, 13:52
by silverbullet
Where's the front of you gearchange box gone? Shouldn't be able to look in the front :?

Re: Doka jagdwagon welding.

Posted: 31 Mar 2011, 15:05
by xriss
petrol and diesel differ


https://club8090.co.uk/wiki/Ge ... nge_images" onclick="window.open(this.href);return false;