ADVICE NEEDED.......
What price?...and whereabouts????
a full t25 exhaust system for a 1989 petrol 1.9 l T25 ????
CHEERS.....
col
email: forgottensoldier73@hotmail.com
What t25 exhaust system for a 1989 petrol 1.9 ?
Moderators: User administrators, Moderators
-
andisnewsyncro
- Registered user
- Posts: 1074
- Joined: 27 Jan 2007, 17:43
- 80-90 Mem No: 3311
- Location: Retford. North Nottinghamshire
Re: What t25 exhaust system for a 1989 petrol 1.9 ?
What a long strange trip it's been
-
ghost123uk
- Registered user
- Posts: 6855
- Joined: 10 Mar 2006, 10:15
- 80-90 Mem No: 2585
- Location: John in Malpas, in the very S. W. part of Cheshire.
- Contact:
Re: What t25 exhaust system for a 1989 petrol 1.9 ?
I got mine from Europarts (branches in most towns) = good German quality and a good price.
Has to be said though that no-one ever has a bad word to say about Brickwerks products or service
I note you are new on here ( Hi by the way )
Don't want to be negative or alarmist - BUT - are you aware of the precautions and possible pitfalls of replacing the exhaust on these engines ? This is mostly regarding getting the bolts & studs out without shearing them. If this happens it can turn into a big(ish) job. There is plenty of info in our wiki section (link at top of every page) re all this.
My advice is =
A - use lots of PlusGas (note NOT WD40) before you start.
B - lots of heat from a hand held gas torch helps a great deal to free off stuck nuts.
C - get a full set of studs and nuts (as well as gaskets) at the time you buy the exhaust.
D - If you have any "issues" post back on here for help (most of us have "been there and done that" )
Has to be said though that no-one ever has a bad word to say about Brickwerks products or service
I note you are new on here ( Hi by the way )
Don't want to be negative or alarmist - BUT - are you aware of the precautions and possible pitfalls of replacing the exhaust on these engines ? This is mostly regarding getting the bolts & studs out without shearing them. If this happens it can turn into a big(ish) job. There is plenty of info in our wiki section (link at top of every page) re all this.
My advice is =
A - use lots of PlusGas (note NOT WD40) before you start.
B - lots of heat from a hand held gas torch helps a great deal to free off stuck nuts.
C - get a full set of studs and nuts (as well as gaskets) at the time you buy the exhaust.
D - If you have any "issues" post back on here for help (most of us have "been there and done that" )
Got a new van, but it's a 165bhp T4 [shock horror] Accurate LPG Station map here
Re: What t25 exhaust system for a 1989 petrol 1.9 ?
I take it you did bother using the search facility or looked in the wiki?
https://club8090.co.uk/wiki/Main_Page#Exhausts
viewtopic.php?f=37&t=75278
https://club8090.co.uk/wiki/Main_Page#Exhausts
viewtopic.php?f=37&t=75278