My suspension hangers are, well.....hangin
Inner trailing arm mounts are perfect but the outers have succumbed to too much tin worm and are now a little thin for my liking. Ive tried a search for info but couldn't seem to find anything so a post to ask the question-
Anyone had any experience of changing them?
Does a prefab panel exist?
thanks in advance
Trailing Arm Mounts
Moderators: User administrators, Moderators
-
..lee..
- Registered user
- Posts: 736
- Joined: 04 Jun 2006, 22:13
- 80-90 Mem No: 4478
- Location: llanelli, s wales
Re: Trailing Arm Mounts
just changed one on a customers syncro, couldn`t get a panel so ended up making one out of 4mm steel. you`ll need to jig it up before you strip the rotton one out but wasn`t that bad to do once you got stuck in.
Re: Trailing Arm Mounts
..lee.. wrote:just changed one on a customers syncro, couldn`t get a panel so ended up making one out of 4mm steel. you`ll need to jig it up before you strip the rotton one out but wasn`t that bad to do once you got stuck in.
Nice 1 Lee fabricate it is then ta!
-
Aidan
- Trader
- Posts: 7364
- Joined: 11 Oct 2005, 19:21
- 80-90 Mem No: 742
- Location: Llanfyllin, mid Wales : )
Re: Trailing Arm Mounts
they may still be available from classic in germany, I can ask if reqd.
AIDAN 
-
silverbullet
- Trader
- Posts: 17620
- Joined: 08 Jun 2009, 09:51
- 80-90 Mem No: 6908
- Location: Surrey Syncronaut #156
- Contact:
Re: Trailing Arm Mounts
My offside outer one has seen better days too, even if the mot man considered it ok (no advisories)
On the jobs list...
On the jobs list...
1985 Oettinger 3.2 wbx-6 Caravelle RHD syncro twin slider. SA Microbus bumpers, duplex winch system, ARC 7X15 alloys,
"Schrödinger's syncro"
Syncronaut #156
"Schrödinger's syncro"
Syncronaut #156