Hello.
I need a set of flywheel bolts for my 2.1DJ. They are M12 x 20 with a pitch of 1.5 and a low profile socket cap head (about 10mm depth rather than typical 12mm) although hex would do.
Please let know where I might get some. I've already tried VW, JK, VW Heritage and local fastener suppliers.
Cheers.
2.1 flywheel bolts - where from? Any suggestions?
Moderators: User administrators, Moderators
-
GreatCrestedNewt
- Registered user
- Posts: 12
- Joined: 07 Jun 2009, 16:22
- 80-90 Mem No: 7012
- Location: Cumbria
2.1 flywheel bolts - where from? Any suggestions?
Heartwood Enterprises - Everything to do with trees...
http://www.heartwoodenterprises.co.uk" onclick="window.open(this.href);return false;
http://www.heartwoodenterprises.co.uk" onclick="window.open(this.href);return false;
-
GreatCrestedNewt
- Registered user
- Posts: 12
- Joined: 07 Jun 2009, 16:22
- 80-90 Mem No: 7012
- Location: Cumbria
Re: 2.1 flywheel bolts - where from? Any suggestions?
Job done - I cut down some overlength set screws and ground the heads to a low profile.
Heartwood Enterprises - Everything to do with trees...
http://www.heartwoodenterprises.co.uk" onclick="window.open(this.href);return false;
http://www.heartwoodenterprises.co.uk" onclick="window.open(this.href);return false;
-
Yozza
- Registered user
- Posts: 45
- Joined: 15 Oct 2008, 19:28
- 80-90 Mem No: 6195
- Location: Stoke-on-Trent
Re: 2.1 flywheel bolts - where from? Any suggestions?
I'm sure you've already checked, are the screws right grade (tensile strength)?
T25 '90 2.1i 16" Doka
JCB 3C MkII
Thwaites 6000
JCB 3C MkII
Thwaites 6000
-
GreatCrestedNewt
- Registered user
- Posts: 12
- Joined: 07 Jun 2009, 16:22
- 80-90 Mem No: 7012
- Location: Cumbria
Re: 2.1 flywheel bolts - where from? Any suggestions?
Good point. I used 12.9.
Heartwood Enterprises - Everything to do with trees...
http://www.heartwoodenterprises.co.uk" onclick="window.open(this.href);return false;
http://www.heartwoodenterprises.co.uk" onclick="window.open(this.href);return false;