vulcan 240 volt set up
Moderators: User administrators, Moderators
vulcan 240 volt set up
as any 1 a picture of the inside of this so i can try wire it up without doing any serious damage and let me no if i can use the 12 volt set up through it of the same plugs i have connectd their is only 1 plug on my fridge even thou its a 3 way 1 so please help again thanks 2 you all who look and reply
- Team28crew
- Registered user
- Posts: 190
- Joined: 29 Jul 2008, 20:26
- 80-90 Mem No: 5770
- Location: Wirral
Re: vulcan 240 volt set up
Hi don't know anything about the Vulcan 240 thing but your fridge will only have one plug for the 240v feed, the 3way fridge runs off Gas/12v/240v
Gas obviously comes from your gas tank/botttle, 240v for when your on hook up and the 12v is wired to your alternator via a relay which will run your fridge on 12v only when the engine is running.
Hope this helps
Gas obviously comes from your gas tank/botttle, 240v for when your on hook up and the 12v is wired to your alternator via a relay which will run your fridge on 12v only when the engine is running.
Hope this helps
1986 1.9DF LeisureDrive Hi Top LPG'd by Gasure
Re: vulcan 240 volt set up
cheers' problem is theirs only 1 set of wires thanks for the info
Re: vulcan 240 volt set up
yes it iskevtherev wrote:what fridge is it... electrolux??
- kevtherev
- Registered user
- Posts: 18832
- Joined: 23 Oct 2005, 20:13
- 80-90 Mem No: 2264
- Location: Country estate Wolverhampton Actually
Re: vulcan 240 volt set up
is it model RM 123?
or RM 212.
on RM 123 the connector block for 230v is behind the cover... whereas the 12v block is visible
here in the clubs download section is a diagram (fig 10) of the RM 123 rear.
I'm surprised you didn't find it when you searched.
http://www.club80-90.co.uk/pages/downlo ... xRM122.pdf
follow the instructions on this when you wire it up
or RM 212.
on RM 123 the connector block for 230v is behind the cover... whereas the 12v block is visible
here in the clubs download section is a diagram (fig 10) of the RM 123 rear.
I'm surprised you didn't find it when you searched.
http://www.club80-90.co.uk/pages/downlo ... xRM122.pdf
follow the instructions on this when you wire it up
AGG 2.0L 8V. (Golf GTi MkIII)
Re: vulcan 240 volt set up
cheers kev ye a geezerkevtherev wrote:is it model RM 123?
or RM 212.
on RM 123 the connector block for 230v is behind the cover... whereas the 12v block is visible
here in the clubs download section is a diagram (fig 10) of the RM 123 rear.
I'm surprised you didn't find it when you searched.
http://www.club80-90.co.uk/pages/downlo ... xRM122.pdf
follow the instructions on this when you wire it up