how to check my eletroclux rm212

The Tardis factor (interiors , awnings, roofs etc)

Moderators: User administrators, Moderators

Locked
zippster
Registered user
Posts: 94
Joined: 27 Jun 2010, 08:25
80-90 Mem No: 1850
Location: pinchbeck

how to check my eletroclux rm212

Post by zippster »

how can i check if it works as i have taken one out a caravan. the fridge hasnt been used for couple of years i want to check it before i put it in my van, i have plugged it into 230v at home but nothing happened no noise what can i check, to get it working??? :x

Plasticman
Trader
Posts: 8077
Joined: 12 Oct 2005, 20:55
80-90 Mem No: 1948
Location: lincolnshire

Re: how to check my eletroclux rm212

Post by Plasticman »

They dont make a noise, leave it on for a few hours and see if the flue gets warmish and are any of the pipes at the rear either warm or cool. if nothing then 240v element may be goosed.
mike

zippster
Registered user
Posts: 94
Joined: 27 Jun 2010, 08:25
80-90 Mem No: 1850
Location: pinchbeck

Re: how to check my eletroclux rm212

Post by zippster »

oh right i would i thoght make some noise ok ill plug it in and see thanks

User avatar
kevtherev
Registered user
Posts: 18832
Joined: 23 Oct 2005, 20:13
80-90 Mem No: 2264
Location: Country estate Wolverhampton Actually

Re: how to check my eletroclux rm212

Post by kevtherev »

the flue only gets warm on gas

it'll take half an hour to feel ice in the freezer box
AGG 2.0L 8V. (Golf GTi MkIII)

Plasticman
Trader
Posts: 8077
Joined: 12 Oct 2005, 20:55
80-90 Mem No: 1948
Location: lincolnshire

Re: how to check my eletroclux rm212

Post by Plasticman »

Kev if hes got it out and its working he will feel 'some 'heat on the flue assembly and the lovely mass of tubes at the rear will have differing temperatures, .If not, then we can safely assume its not working on 240v.. :rofl
mike

zippster
Registered user
Posts: 94
Joined: 27 Jun 2010, 08:25
80-90 Mem No: 1850
Location: pinchbeck

Re: how to check my eletroclux rm212

Post by zippster »

yeah it works on 230v now thanks for the help :ok

Cruz
Registered user
Posts: 3919
Joined: 12 Oct 2005, 10:40
80-90 Mem No: 2092

Re: how to check my eletroclux rm212

Post by Cruz »

While it's out leave it upside down for 24 hours and give it a good check and clean.

Plasticman
Trader
Posts: 8077
Joined: 12 Oct 2005, 20:55
80-90 Mem No: 1948
Location: lincolnshire

Re: how to check my eletroclux rm212

Post by Plasticman »

As Cruz says but dont forget to leave it the right way up for as long before firing it up
mike

Locked