Hi
In the process of doing up my crewcab interior and the head lining is in pretty good nick but some of the edges have come away from the fixings. There is not enough play to push back under with a screw driver and im guessing there must be a special tool!
Would appreciate any ideas .......
Cheers
HEADING LINING
Moderators: User administrators, Moderators
-
kaminokid
- Registered user
- Posts: 171
- Joined: 28 Jul 2009, 16:21
- 80-90 Mem No: 7175
- Location: South Coast
HEADING LINING
88 Holdsworth "Reg"
-
JamesT25
- Registered user
- Posts: 74
- Joined: 24 Sep 2008, 21:24
- 80-90 Mem No: 6288
- Location: Chorley, Lancs
Re: HEADING LINING
the headlining has most proably ripped, i had a new one made up for mine and have still to get round to fitting it.
basically the material bends under the metal lip and then the lip is hammered back to pinch the fabric to the metalwork if that makes sense. dont think there is a special tool
hope that helps
James
basically the material bends under the metal lip and then the lip is hammered back to pinch the fabric to the metalwork if that makes sense. dont think there is a special tool
hope that helps
James