Running PAS on a subaru conversion.....Any issues?

Big lumps of metals and spanners.

Moderators: User administrators, Moderators

Locked
KarlT
Registered user
Posts: 2964
Joined: 28 Nov 2005, 21:39
80-90 Mem No: 2266
Location: location, location.---Sunny South Devon
Contact:

Running PAS on a subaru conversion.....Any issues?

Post by KarlT »

Hi.
Is anyone running PAS off a subaru engine/pump?
Possible? Pig to get right? Different pressure issues?
Cheers Karl.

User avatar
axeman
Registered user
Posts: 1249
Joined: 07 Feb 2009, 19:50
80-90 Mem No: 6410
Location: Smeeth kent country side

Re: Running PAS on a subaru conversion.....Any issues?

Post by axeman »

pm syncroandy, he is running an ej25 with PAS, i think that it is the vw rack, and scooby pump, he had to get the pipes made up, again i think it was by devon dave.

neil
Back in the game with an uncut 2wd panel van

KarlT
Registered user
Posts: 2964
Joined: 28 Nov 2005, 21:39
80-90 Mem No: 2266
Location: location, location.---Sunny South Devon
Contact:

Re: Running PAS on a subaru conversion.....Any issues?

Post by KarlT »

Cheers for that Neil. I'll check. :ok

big red bus
Registered user
Posts: 316
Joined: 19 Feb 2007, 16:30
80-90 Mem No: 3421
Location: west midlands (3421)

Re: Running PAS on a subaru conversion.....Any issues?

Post by big red bus »

Got p/s on my caravelle and running a 2.2 subaru. All gen vw apart from pipe work to the pump and the pump. Used original subaru pump and had pipe made for pressure side at a place called Pirtek. other hose is simple push on rubber hose with hose clip. Very straight forward and had no problems. :ok

futbus
Trader
Posts: 498
Joined: 18 Oct 2005, 16:25
80-90 Mem No: 1266
Location: South Devon
Contact:

Re: Running PAS on a subaru conversion.....Any issues?

Post by futbus »

Karl, pop over and have a look at James`s Magnam, 2.2 with factory PAS.

Locked