tapered or ball type seat help

[gixster]

Hi ive just got a set of merc wheels the bolt holes have been inlarged to take the 14 mm bolts the centre bore is fine but dont no which type of seat is required for the bolts(tapered or radius) the wheels are off a e class part no 210-4010402 as any one fitted these they are 7.5x16 et 41 with 215x16x55 tyres what spacers did you use and what bolt lenth is required to fit t25 thks

[poshbuggers]

M14x1.5mm Radius

Might need a 5mm spacer at the front. You will need extended studs but will have to measure the thickness through the wheel/lacking on your existing studs to get that measurement.

Call Simon @ Brickwerks. He stocks the bits and will be able to advise on the right lengths

[Simon Baxter]

Don't call simon @ Brickwerks as he won't have a clue as he can't see the wheel.
Instead read this page and get your calculator out!!

<<click>>