How do I remove the clutch lever arm (diesel)

[sdelasal]

I need to remove the clutch lever off of the release bearing shaft in order to swop over the clutch slave cylinder mount to my new gearbox ...how do I do it .. I've removed the circlip at the end of the shaft but it isn't shifting! Steve

[Aidan]

move the internal circlip upto the fork and then you can slide the arm end out and then the bracket will slide off and over the end of the arm.
To remove the arm you will need a small gear puller

[sdelasal]

thanks - a few taps and it dropped off.