When fitting a high top, is it necessary to flatten the paint back on the contact area on the side of the roof to bare metal so that the tigerseal is bonded to the roof and not just the paint?
Thanks in advance
When fitting a hightop
Moderators: User administrators, Moderators
-
"WEAZLECHIN"
- Registered user
- Posts: 233
- Joined: 13 Jan 2006, 09:58
- 80-90 Mem No: 0
- Location: j9 m6. you know, traffic jam..
Re: When fitting a hightop
i just fixed mine onto the un-flatted paint. ps, sikaflex maybe better than tigerseal, but they or more or less the same.
-
jake1953
- Registered user
- Posts: 246
- Joined: 29 Dec 2008, 14:30
- 80-90 Mem No: 6196
- Location: Preston Lancs.
Re: When fitting a hightop
Cheers weazlechin, Just looking for peace of mind to allay fears of the hightop flying off !!
Have already bought the tigerseal though. Apparently Timber Technicians use it so it should do the job ok.
Have already bought the tigerseal though. Apparently Timber Technicians use it so it should do the job ok.