Saab 95 seats
Moderators: User administrators, Moderators
-
Wavehead
- Registered user
- Posts: 72
- Joined: 13 Nov 2005, 08:57
- 80-90 Mem No: 5509
- Location: Poole, Dorset
Saab 95 seats
Has anyone fitted Saab 95 seats? I bought a pair off fleabay for next to nothing but seems that the runners are a much narrower (16.25 inches) than my existing (17.75 inches) installation? I was expecting them to be a little too wide as opposed to too narrow?
If at first you don't succeed, destroy all evidence that you tried.
__________________
Member number 5509
__________________
Member number 5509
-
VWCamperfan
- Registered user
- Posts: 993
- Joined: 08 Jul 2007, 19:47
- 80-90 Mem No: 4000
- Location: Sheerness, Kent.
Re: Saab 95 seats
Have fitted similar in mine but Saab 9000 seats. No difference really so far as mounting goes. You need to run a bar from one side of the original seat mounts to the other, front and rear, then the Saab seat will sit on top and bolt through these. I used stainless rectangular box section for mine, about 35mm x 20mm. Used stainless as it's slightly stronger, won't rust and had some at the time but normal steel can be used also.
Mark.
I'm Not A Complete Idiot... Some Bits Are Missing!
1.6 Modified CT engine.
I'm Not A Complete Idiot... Some Bits Are Missing!
1.6 Modified CT engine.