bag type pull-out awning

The Tardis factor (interiors , awnings, roofs etc)

Moderators: User administrators, Moderators

Locked
wigster
Registered user
Posts: 144
Joined: 07 Nov 2008, 21:50
80-90 Mem No: 7450
Location: Turnip field just north o york

bag type pull-out awning

Post by wigster »

have had a look on't wiki, but can't seem to find owt. I have a fiamma awning that is usually on my t4, but I'd like to have it on the t3 now and again, what is the most common way to fit the awning rail on the t3? also is there a specific rail as is for the t4, I would prefer not to just nail :shock: a standard bit of caravan rail to the roof..cheers wig
HOW MUCH!
1987 1.9tdi pug powered twin slider velle

User avatar
kevtherev
Registered user
Posts: 18832
Joined: 23 Oct 2005, 20:13
80-90 Mem No: 2264
Location: Country estate Wolverhampton Actually

Re: bag type pull-out awning

Post by kevtherev »

I used pop rivets to fix my awning rail to the high top
AGG 2.0L 8V. (Golf GTi MkIII)

User avatar
Ian Hulley
Registered user
Posts: 12661
Joined: 11 Oct 2005, 08:08
80-90 Mem No: 1323
Location: Wirksworth, Derbyshire ... or at t'mill

Re: bag type pull-out awning

Post by Ian Hulley »

kevtherev wrote:I used pop rivets to fix my awning rail to the high top

Ditto that. :ok

Ian
The Hulley's Bus
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure

wigster
Registered user
Posts: 144
Joined: 07 Nov 2008, 21:50
80-90 Mem No: 7450
Location: Turnip field just north o york

Re: bag type pull-out awning

Post by wigster »

aye, thanks guys,I used pop rivets on some rail on my 1st t4, only to find out there was a nice vw contoured rail that looks factory, just after I fitted it :cry: so I thought this time I should get some suggestions from the t3 fountain of wisdom :roll: , I did also wonder bowt fitting some rail to the roof bars...
HOW MUCH!
1987 1.9tdi pug powered twin slider velle

Locked