Propex heating electrics need person in leeds area

[simonrwilson]

Help ! I bought a 1990 T25 last year and I cannot get the propex compat 1600w to work. I think thermostat and wiring need checking. can anyone advise someone in the leeds area. thanks in advance simon

[kentishvanman]

Why not give Propex a ring. I gather they are quite helpful.
Don

[nindy]

Do a search on the net for propex's number and call them , they are very helpful even if you haven't bought it off them !! They aslo do the parts if you need them !!

[Rincewind]

theres Steve at Gasure too, albeit in Chester


he's fitting mine, and authorised dealer i believe...

[quagmire]

simon,before you go any further,undo the fuse for the propex.look inside the propex(through the vents)so you can see the fan.ok? get a long handled screwdriver and gently move it left or right.if it moves freely(spins like a hamster wheel) it is probably an electrical problem.if it doesn't budge then the fan has stuck on.you will need to remove the propex,undo it (about 6 screws)and grease the base of the fan in wd40 moving the fan all the time back and forth.it will eventually work free! this was the advice i was given by the good man at propex.worked for me and the campcharlies.good luck mate