Battery terminal crimp tool

[skell]

Anyone in Sussex area or going to vanfest got a crimping tool big enough for 40mm2 cable I could borrow? adding an extra power cable to starter.

thanks

[Fritz]

So you will be in need of one of these things then,,,,,,,



Good luck.


Regards


Fritz,,,,,,,

Alternative may be to have the terminal soldered in place,,,,,,,,but it need to be done by someone who knows what they are doing to get it right.....

[Oldiebut goodie]

Having seen the corrosion that occurs in boat wiring I would never advocate crimping any wiring connections - all mine are soldered from the smallest to the largest(battery terminals). (those stupid plastic shrouds on the commonly available spade and ring terminals come straight off and solder applied) Crimped terminals are the best source of electrical problems after those damn scotchlock things.