Hey,
i have a T25 1.6D from 1985 and last ride i noticed when i put lights on with ignition switch off the instrument panel has light. When i turn ignition switch on, the instrument panel light goes out and the highbeam indicator goes on. Also when i switch of the lights the cooling water indicator lamp starts blinking again. Lights are working...
Anyone has an idea what this could be? Mass problem?
thanks,
Fred
electrical problem
Moderators: User administrators, Moderators
- BALDY3260
- Registered user
- Posts: 134
- Joined: 16 Apr 2009, 08:52
- 80-90 Mem No: 7736
- Location: East Sussex
Re: electrical problem
TRY WAGGLING THE MULTI PIN CONNECTOR UNDER THE DASH BINNACLE HAD THE SAME PROBLEM WITH MINE AND A COUPLE OF REMOVING AND PUTTING BACKS HAD IT ALL WORKING FINE oops bloody caps lock
also there's some real good england typed there





'95 T4 syncro multivan '08 fiat500(mrs.b's)(never for sale apparently)
- VWCamperfan
- Registered user
- Posts: 993
- Joined: 08 Jul 2007, 19:47
- 80-90 Mem No: 4000
- Location: Sheerness, Kent.
Re: electrical problem
You havn't got main beam lock on have you? Side lights when ignition off and main beam with ignition on? Would give those lights on dash you are getting.
Mark.
I'm Not A Complete Idiot... Some Bits Are Missing!
1.6 Modified CT engine.
I'm Not A Complete Idiot... Some Bits Are Missing!
1.6 Modified CT engine.