anyway i'm now lost on how to finish the job. if anyone out there has fitted these carbs could they please post pictures of how they should look. as much detail as possible please.cheers kev
weber/empi ict help!
Moderators: User administrators, Moderators
-
LUBO
- Registered user
- Posts: 145
- Joined: 20 Oct 2005, 15:27
- 80-90 Mem No: 0
- Location: KILWINNING, AYRSHIRE, SCOTLAND
weber/empi ict help!
Alright trying to install my newly purchased(used) ict carbs. they where advertised as webers but are the empi copies anyway i'm now lost on how to finish the job. if anyone out there has fitted these carbs could they please post pictures of how they should look. as much detail as possible please.
cheers kev
anyway i'm now lost on how to finish the job. if anyone out there has fitted these carbs could they please post pictures of how they should look. as much detail as possible please.cheers kev
Why pay someone else to fix it for you when you can waste 2 months doing it yourself!
-
LUBO
- Registered user
- Posts: 145
- Joined: 20 Oct 2005, 15:27
- 80-90 Mem No: 0
- Location: KILWINNING, AYRSHIRE, SCOTLAND
Re: weber/empi ict help!
Ok the pictures are a bit much to ask 
the point i'm at is i can see where the servo pipe attaches into the inlet manifolds. the old carbs also had a pipe running between them which also had a vacuum pipe coming from the dizzy attached. the old carbs also had to attchments for these vacuum pipes coming from the dizzy. the new carbs have one less connection pipe. what do i do away with?
the rubber balance hose between the carbs and just attach the vacuum pipes up or do i forget about the vacuum pipes coming from the dizzy??
i was given two vacuum pipes with the carbs. nothing else
the point i'm at is i can see where the servo pipe attaches into the inlet manifolds. the old carbs also had a pipe running between them which also had a vacuum pipe coming from the dizzy attached. the old carbs also had to attchments for these vacuum pipes coming from the dizzy. the new carbs have one less connection pipe. what do i do away with?the rubber balance hose between the carbs and just attach the vacuum pipes up or do i forget about the vacuum pipes coming from the dizzy??
i was given two vacuum pipes with the carbs. nothing else
Why pay someone else to fix it for you when you can waste 2 months doing it yourself!
-
gsmoke
- Registered user
- Posts: 74
- Joined: 04 Dec 2006, 21:09
- 80-90 Mem No: 2975
- Location: SOUTH WALES
Re: weber/empi ict help!
Hi Lupo.
I dont specifically know the ict carbs but the theory will be the same.
You need to connect the brake servo pipe to the manifold.
The vac advance off the dizzy (the pipe on top of the mushroom bit) is attached to the carb and the vac retard (the bottom pipe) goes to the airbox. I run dellorto drlas and have no airbox so this is not attached.
I would also speak to your suppliers to make sure that they are jetted correctly for your engine size. I think I've read about running problems with them.
I dont specifically know the ict carbs but the theory will be the same.
You need to connect the brake servo pipe to the manifold.
The vac advance off the dizzy (the pipe on top of the mushroom bit) is attached to the carb and the vac retard (the bottom pipe) goes to the airbox. I run dellorto drlas and have no airbox so this is not attached.
I would also speak to your suppliers to make sure that they are jetted correctly for your engine size. I think I've read about running problems with them.
-
LUBO
- Registered user
- Posts: 145
- Joined: 20 Oct 2005, 15:27
- 80-90 Mem No: 0
- Location: KILWINNING, AYRSHIRE, SCOTLAND
Re: weber/empi ict help!
Cheers. so your saying the vacuum pipes from the dizzy are no longer needed. that would make sense. do you have to block off the holes in the dizzy for these pipes?
cheers kev
cheers kev
Why pay someone else to fix it for you when you can waste 2 months doing it yourself!
-
LUBO
- Registered user
- Posts: 145
- Joined: 20 Oct 2005, 15:27
- 80-90 Mem No: 0
- Location: KILWINNING, AYRSHIRE, SCOTLAND
Re: weber/empi ict help!
Understand what i'm doing now but still have loads of springs with no obvious place to put them 
there also doesn't appear to be anything to attach the throttle cable to the linkage bar anyone got pics of these carbs set up in a van? 
there also doesn't appear to be anything to attach the throttle cable to the linkage bar anyone got pics of these carbs set up in a van? Why pay someone else to fix it for you when you can waste 2 months doing it yourself!
-
gsmoke
- Registered user
- Posts: 74
- Joined: 04 Dec 2006, 21:09
- 80-90 Mem No: 2975
- Location: SOUTH WALES
Re: weber/empi ict help!
"Cheers. so your saying the vacuum pipes from the dizzy are no longer needed. that would make sense. do you have to block off the holes in the dizzy for these pipes?"
No, you need to attach the vac advance from the dizzy to the carb. The retard is left un-attached, its only for emissions on tick over.
Re-read what Globbits has already explained this to you on brick-yard.
No, you need to attach the vac advance from the dizzy to the carb. The retard is left un-attached, its only for emissions on tick over.
Re-read what Globbits has already explained this to you on brick-yard.
-
LUBO
- Registered user
- Posts: 145
- Joined: 20 Oct 2005, 15:27
- 80-90 Mem No: 0
- Location: KILWINNING, AYRSHIRE, SCOTLAND
Re: weber/empi ict help!
got it gsmoke problems continue as above post. i should have just bought new and saved myself this hassle
problems continue as above post. i should have just bought new and saved myself this hassle Why pay someone else to fix it for you when you can waste 2 months doing it yourself!