cab floor

Post by **dannyg1985** » 13 Aug 2009, 20:52

guys im looking at gettin me cab floor redone in me 83 t25, any hint or tips of where i could get hold of replacement one new or is it to be a donor van needed, also anyone near me that would be able to help me with it over the winter??? payment can be CASH OR LOADSA BEER ECT... cheers guys

Post by **futbus** » 14 Aug 2009, 12:55

First try VW you may be lucky and they may still have in stock, or your`ll have to cut one out of a van. Petrol or diesel as they are different. Maybe able to help as we have and are scrapping a couple of vans at the moment.

Post by **dannyg1985** » 14 Aug 2009, 15:42

TIS A 83 1.9PETROL

Post by **dannyg1985** » 16 Aug 2009, 18:20

Post by **Cruz** » 17 Aug 2009, 10:41

futbus wrote:First try VW you may be lucky and they may still have in stock, or your`ll have to cut one out of a van.

have you tried these two options?

What condition is your cab floor in? Post some pictures and maybe someone can advise you on how to fix it without the drastic action of replacing the whole floor

Post by **dannyg1985** » 17 Aug 2009, 11:00

will get some pics in a bit,,, will try vw now

Post by **dannyg1985** » 17 Aug 2009, 14:09

RITE (oops) i have a few pics will put passenger side up 1st

2 top ones is smallish holes and the bottom one just looks a bit thin really

drivers side seems to be ok but i aint no expert

pics

looks a bit brown but cany find any holes in driver side,,,

any opinions would be great cheers dan

Post by **Gunslinger** » 17 Aug 2009, 14:15

I'd be grinding out the rust and plating it, or rather I'd be getting one of my colleague's to do it. New floor pan seems extreme to me

Website · Post by **CovKid** » 17 Aug 2009, 14:27

Agree, any good welder can make these up as he/she goes. Don't think you need to buy panels as such.

Post by **dannyg1985** » 17 Aug 2009, 14:38

sweeeeeeeeeeeeeeeeeeeeeeeeet

cheers guys u just made my day

Post by **Cruz** » 17 Aug 2009, 15:29

I had mine plated Danny. That's why I asked you to post pics so you'd find out you didn't need to do something as drastic as replace the whole floor

Post by **dannyg1985** » 18 Aug 2009, 13:19

how much ££££££££££££££££££££££ do ya recon it'll cost me to get both sides redone????????

Post by **dannyg1985** » 03 Sep 2009, 09:12

rite iv had a price of £80 to do both sides,,, is that about rite or too cheap /expensive ecttt..... just wana get it done NOW :run

Website · Post by **CovKid** » 03 Sep 2009, 13:58

Seems ok - long as its tidy afterwards. Just plating over is not great, better that he cuts back to solid which I presume he'll do for £80.

Post by **dannyg1985** » 04 Sep 2009, 08:58

yeh he said he'd cutout all the nasty metal eatin stuff and go from solid

Club 80-90 Forums

cab floor

cab floor

Re: cab floor

Re: cab floor

Re: cab floor

Re: cab floor

Re: cab floor

Re: cab floor

Re: cab floor

Re: cab floor

Re: cab floor

Re: cab floor

Re: cab floor

Re: cab floor

Re: cab floor

Re: cab floor