Just wondering if anyone has fitted electric windows to there T25, I have a complete set of winders, electrical loom from a MKII golf same year as my van before I get carried away just wondering if its been done
Thanks
Electric Windows
Moderators: User administrators, Moderators
Electric Windows
Have a nice day !
-
CovKid
- Trader
- Posts: 8411
- Joined: 30 Apr 2006, 13:19
- 80-90 Mem No: 3529
- Location: Ralph - Coventry (Retired)
- Contact:
Re: Electric Windows
Certainly can be done. You just have to remember that the windows are damned heavy going up so the motors need to be man enough. My bus is quite ratty compared to others in the area but hey I've got elecric windows so I can be smug on those at least. I fitted old (but never used) electric motor units that fit directly on the winder handle. They literally screw on to the door panels.
In my view they ARE worth fitting as you cannot (annoyingly) wind the passenger window up or down whilst driving, but with elecric I've got much better control - particularly on those rare hot days. If you have an inventive mind you can adapt a few things to make them work.
In my view they ARE worth fitting as you cannot (annoyingly) wind the passenger window up or down whilst driving, but with elecric I've got much better control - particularly on those rare hot days. If you have an inventive mind you can adapt a few things to make them work.
Roller paint your camper at home: http://roller.epizy.com/55554/" onclick="window.open(this.href);return false; for MP4 download.
Re: Electric Windows
I want to fit electric windows aswell but im unsure of what motors and arms to buy, i have some from an astra mk4 but no idea if they will fit.
Does anyone know if alot of arms and motors can be used universally aslong as they physically fit?
Ta
Does anyone know if alot of arms and motors can be used universally aslong as they physically fit?
Ta
Last edited by fix on 07 Aug 2009, 12:37, edited 1 time in total.
Re: Electric Windows
Had all the stuff just sitting there, was going to fit it to the golf but thought it might be good on the van so I will give it a go and see how I get on, will let you know.
Have a nice day !
-
armyphil
- Registered user
- Posts: 1447
- Joined: 03 Jan 2009, 19:57
- 80-90 Mem No: 6328
- Location: Huddersfield
Re: Electric Windows
i got mine of rover 400 they look pretty easy to fit when i eventually get round to fitting them
You can say alot of of things with "ar"
1984 syncro westfalia
07732299324
1984 syncro westfalia
07732299324
-
Aberdeenbus
- Registered user
- Posts: 183
- Joined: 03 Jan 2006, 13:28
- 80-90 Mem No: 6846
- Location: Aberdeen
Re: Electric Windows
Your best bet is to get a motor which will fit inplace of the origional winding mechanism and still use the channels (wie snake)and everything else, I got mine out of a jeep LTD, the motors just bolted on where the winder came off.
Nice and easy, there was a write up with a load of pics on the brickyard a couple of years ago.
Cheers
Si
Nice and easy, there was a write up with a load of pics on the brickyard a couple of years ago.
Cheers
Si
-
Aberdeenbus
- Registered user
- Posts: 183
- Joined: 03 Jan 2006, 13:28
- 80-90 Mem No: 6846
- Location: Aberdeen
Re: Electric Windows
Electric Windows.
Having balked at the price of OEM electric windows and the rapidly rising cost of suitably bodgeable Golf ones.
I thought what else will fit, after ages looking around my local scrappy I found an M reg Jeep Cherokee with a similar set up
The first thing to do is to remove the winder regulator and slides from the door then, carefully (don’t damage the flexible coil with the window mount on) with a grinder cut the old regulator off this will also entail banging out the two welds on the rear, these hold the regulator in place on the slide and stop it slipping. Remove the flexible coil and keep safe.
Split the Jeep electric motor regulator in two by banging out the securing pins and split in half the non motor side of the casing can have its welds drilled out and then be welded to the Vw slides through the two holes in the rear, a little galvanizing spray and bobs your uncle.
Feed the flexible coil back into the slides. The motor assembly can then be bolted back on with suitable bolts the whole lot can be fed back in to the window lining up the top and bottom bolts you can then see where you need to drill holes for the motor mountings.
Having balked at the price of OEM electric windows and the rapidly rising cost of suitably bodgeable Golf ones.
I thought what else will fit, after ages looking around my local scrappy I found an M reg Jeep Cherokee with a similar set up
The first thing to do is to remove the winder regulator and slides from the door then, carefully (don’t damage the flexible coil with the window mount on) with a grinder cut the old regulator off this will also entail banging out the two welds on the rear, these hold the regulator in place on the slide and stop it slipping. Remove the flexible coil and keep safe.
Split the Jeep electric motor regulator in two by banging out the securing pins and split in half the non motor side of the casing can have its welds drilled out and then be welded to the Vw slides through the two holes in the rear, a little galvanizing spray and bobs your uncle.
Feed the flexible coil back into the slides. The motor assembly can then be bolted back on with suitable bolts the whole lot can be fed back in to the window lining up the top and bottom bolts you can then see where you need to drill holes for the motor mountings.