General Technical Questions and Answers last answered over 1 year ago.
You may also want to visit the Wiki(pedia) for a more structured index of T25 repair, maintenance, technical and ownership topics
Flippin' eck...just had all my brakes done on my 86 1.6 Diesel (new discs/calipers/pads/pipes/bearings) and when I picked her up from garage she wouldn't start. Managed to get a tow start and she fired up OK and cruised brilliantly home at 67mph (yes you read that right ! 67mph!).
Anyway, just tried her again..same problem...engine turning over but not firing. Starter motor and battery both good. Garage chap said that timing belt seemed loose and we weren't convinced fuel was coming through the injectors when turning over ? It was running fine until now, although had to replace both V belts last week. If the diesel pump was knackered would it still have run once tow started?? Will go and have another look over it but any advice (as always) much appreciated.
Feeling really fed up as this may force us to commence divorce proceedings with our beloved van and all things that are good with the T25 community as our piggy banks are empty after the repairs!!
Hi mate i'm just down the road in p'boro if you need a hand not hand much to do with the derv models have you tried crackin the injectors off and seeing if the fuel is getting there may have air in the system some were, are the plugs getting hot enough, If it need's a new cambelt and its the same as the old golf lumps they dont take long i can bung one on for you but i've not hearded of a loose belt stopping them running before, give us a shout if want bud
cheers nick
Hey Nick...you're a bleedin star mate. I'll give her the once over tomorrow and see if I can narrow it down. I'd be gutted to give up on the van after splashing so much cash at it. I'll PM you on how it goes ( and if I can learn to PM )
Well...had a wee look at her this morning using the fab guide under the diesel engines -diagnosis section. Fuel filter OK, diesel getting to injectors OK, glow plug fuseable strip - knackered. So 44 pence later and she's starting perfectly Cripes...it's enuff to do your head in eh !! Thanks again for the advice Nick....will contemplate logistics of getting cambelt done soon. I'll PM you or if that don't work..drop me an email - I think it's on my Personal Info.
Flippin' eck...just had all my brakes done on my 86 1.6 Diesel (new discs/calipers/pads/pipes/bearings) and when I picked her up from garage she wouldn't start. Managed to get a tow start and she fired up OK and cruised brilliantly home at 67mph (yes you read that right ! 
67mph!). 
)
