feed to the horn..where should i be lookin...update!!!!!!!!!
Moderators: User administrators, Moderators
- oldiguana
- Registered user
- Posts: 320
- Joined: 18 May 2006, 10:59
- 80-90 Mem No: 2720
- Location: Loggerheads/Market Drayton
- Contact:
feed to the horn..where should i be lookin...update!!!!!!!!!
yo dudes......the horn on marladys van has been poo for ages.....weak fart then a good fart.....failed mot today but cant seem to find a feed for it...........any ideas where to look please........theres 2 wires in the centre of the wheel but the brown one doesnt have a live feed...so im a lil stumped??
had another go today.....got a permanant live and a switched live down to the horn,but isnt workin.....dus thee ow think the orns shafted awoh????
had another go today.....got a permanant live and a switched live down to the horn,but isnt workin.....dus thee ow think the orns shafted awoh????
Last edited by oldiguana on 16 Jun 2009, 20:54, edited 1 time in total.
.membership no 2720
- toomanytoys
- Trader
- Posts: 2870
- Joined: 11 Oct 2005, 18:37
- 80-90 Mem No: 41
- Location: Boston area, South Lincolnshire
Re: cant find a feed to the horn..where should i be lookin
Well the horn is mounted under the front....
no power there when you press the horn button then???


- oldiguana
- Registered user
- Posts: 320
- Joined: 18 May 2006, 10:59
- 80-90 Mem No: 2720
- Location: Loggerheads/Market Drayton
- Contact:
Re: cant find a feed to the horn..where should i be lookin
eyup duck....i tried joining the 2 wires in the steering wheel and nowt happened so i assumed it was a feed prob duck.....should i still try to find power at the horn then?
.membership no 2720
-
- Registered user
- Posts: 883
- Joined: 07 May 2009, 09:17
- 80-90 Mem No: 6751
- Location: Cardiff
- Contact:
Re: cant find a feed to the horn..where should i be lookin
On my van the feed comes down as part of the loom which also feeds the driver's side headlight
"There are many paths to redemption.
Not all of them are peaceful...."
Click here for some Visionary 'Nauts.....
For more unchartered heights of disgrace just ring 07872 069462
Not all of them are peaceful...."
Click here for some Visionary 'Nauts.....
For more unchartered heights of disgrace just ring 07872 069462
- toomanytoys
- Trader
- Posts: 2870
- Joined: 11 Oct 2005, 18:37
- 80-90 Mem No: 41
- Location: Boston area, South Lincolnshire
Re: cant find a feed to the horn..where should i be lookin
I'll have a look at the wiring diagram.... 

- toomanytoys
- Trader
- Posts: 2870
- Joined: 11 Oct 2005, 18:37
- 80-90 Mem No: 41
- Location: Boston area, South Lincolnshire
Re: cant find a feed to the horn..where should i be lookin
Fuse number 12 on yours mate... last one on right of the main strip.... 8 Amp (white IIRC) Bloomin haynes list "typical dual horn" and I doubt its got that... as it was a cost option.... Going to check another drawing...
-
- Registered user
- Posts: 883
- Joined: 07 May 2009, 09:17
- 80-90 Mem No: 6751
- Location: Cardiff
- Contact:
Re: cant find a feed to the horn..where should i be lookin
You'll find it on the "fiction" shelf at your local librarytoomanytoys wrote:I'll have a look at the wiring diagram....

"There are many paths to redemption.
Not all of them are peaceful...."
Click here for some Visionary 'Nauts.....
For more unchartered heights of disgrace just ring 07872 069462
Not all of them are peaceful...."
Click here for some Visionary 'Nauts.....
For more unchartered heights of disgrace just ring 07872 069462
- oldiguana
- Registered user
- Posts: 320
- Joined: 18 May 2006, 10:59
- 80-90 Mem No: 2720
- Location: Loggerheads/Market Drayton
- Contact:
Re: cant find a feed to the horn..where should i be lookin
cheerz owduck.....arl av a skant in the morning
.membership no 2720
- toomanytoys
- Trader
- Posts: 2870
- Joined: 11 Oct 2005, 18:37
- 80-90 Mem No: 41
- Location: Boston area, South Lincolnshire
Re: cant find a feed to the horn..where should i be lookin
Not sure I have this right... but
Ignition on.. should be live feed to the horn and the button "earths" it...... Seem to remember this is how a motorbike was set up... no need for a relay (cost reduction)...
Now I will go a ncheck how my late T25 is done... early ones seem to be like that...
Ignition on.. should be live feed to the horn and the button "earths" it...... Seem to remember this is how a motorbike was set up... no need for a relay (cost reduction)...
Now I will go a ncheck how my late T25 is done... early ones seem to be like that...
- toomanytoys
- Trader
- Posts: 2870
- Joined: 11 Oct 2005, 18:37
- 80-90 Mem No: 41
- Location: Boston area, South Lincolnshire
Re: cant find a feed to the horn..where should i be lookin
psychonaut wrote:You'll find it on the "fiction" shelf at your local librarytoomanytoys wrote:I'll have a look at the wiring diagram....
Yeah... the technical section in my garage...........

-
- Registered user
- Posts: 53
- Joined: 26 May 2009, 20:00
- 80-90 Mem No: 5642
Re: feed to the horn..where should i be lookin...update!!!!!!!!!
hi mate,you do need a relay cos the horn runs from a live feed,if you wire it direct then itl sound continuosly!the brown wire is the earth and brown\blue is the live,theyre the only two that come down and appear by the horn,horn has to be earthed to chassis and the relay,had same problem on mine and it was a dodgy earth causing it,theres also two clusters of earths to body behind the fuse panel in the glove,id clean and check them too,hope this helps. leroi 

- tonytech
- Registered user
- Posts: 1194
- Joined: 11 Oct 2005, 06:40
- 80-90 Mem No: 477
- Location: Liverpool
Re: feed to the horn..where should i be lookin...update!!!!!!!!!
Stop confusing the guy.
There is no Relay. some folk add them for higher power horn and air horns, but VW never bothered.
The Horn gets a live feed when the ignition is on.
The earth (return) runs via the horn button to an earth (chasis) on the steeing gear box.
Check the connectors are clean.
T
There is no Relay. some folk add them for higher power horn and air horns, but VW never bothered.
The Horn gets a live feed when the ignition is on.
The earth (return) runs via the horn button to an earth (chasis) on the steeing gear box.
Check the connectors are clean.
T
There are 10 kinds of people. those who understand Binary and those who dont
- ermie571
- Registered user
- Posts: 4970
- Joined: 11 Oct 2005, 11:11
- 80-90 Mem No: 2129
- Location: Minster-on-Sea, Kent: Member 2129 07784052288
Re: feed to the horn..where should i be lookin...update!!!!!!!!!
hI Mate,
my horn gave up the ghost. Sterring wheel connections shot.
New direct feed to horn, and earth to chassis, and a little push button switch from maplins at a cost of around £2.00 - "push to make" the circuit, and the jobs sorted.
Drill hole in plastic dash, and just remember to tell MOT person where the horn push is!
Em
x
my horn gave up the ghost. Sterring wheel connections shot.
New direct feed to horn, and earth to chassis, and a little push button switch from maplins at a cost of around £2.00 - "push to make" the circuit, and the jobs sorted.
Drill hole in plastic dash, and just remember to tell MOT person where the horn push is!
Em
x
2.1 DJ 1990 Caravelle (died and gone to heaven)
2.0 AGG (1997 ish) 1984 transporter LPG
2.0 AGG (1997 ish) 1984 transporter LPG
- oldiguana
- Registered user
- Posts: 320
- Joined: 18 May 2006, 10:59
- 80-90 Mem No: 2720
- Location: Loggerheads/Market Drayton
- Contact:
Re: feed to the horn..where should i be lookin...update!!!!!!!!!
yo dudes........ive got a live feed through the ignition,and now a feed when i pres the horn.....i assume the actual horn earths threw its body........dont know if its right or not......if so does it mean the horn has blown its last chorus???.................
.membership no 2720
- toomanytoys
- Trader
- Posts: 2870
- Joined: 11 Oct 2005, 18:37
- 80-90 Mem No: 41
- Location: Boston area, South Lincolnshire
Re: feed to the horn..where should i be lookin...update!!!!!!!!!
OK.. I was right then..... live feed... with Ign on..
Should be 2 connections on the horn... as if it was earthed through the body it would be "tooting" all the time.... so horn could be US...
Should be 2 connections on the horn... as if it was earthed through the body it would be "tooting" all the time.... so horn could be US...